Product Information UCAR ™ Latex D-70 - Mielco
Product Information UCAR ™ Latex D-70 - Mielco
Product Information UCAR ™ Latex D-70 - Mielco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Product</strong> <strong>Information</strong><br />
<strong>UCAR</strong> <strong>Latex</strong> D-<strong>70</strong><br />
Styrene Acrylic <strong>Latex</strong> For Architectural Wall Paints and<br />
Stucco<br />
<strong>UCAR</strong> <strong>Latex</strong> D-<strong>70</strong> is an APEO free styrene-acrylic copolymer designed for<br />
multipurpose applications. This product can be formulated into many types of paint<br />
over a wide range of pigment volume concentrations from glossy to matt coatings.<br />
<strong>UCAR</strong> <strong>Latex</strong> D <strong>70</strong> has fine particle size for high pigment binding capability. Its<br />
clear film is tough, flexible , tack free, resistant to hydrolysis and has excellent water<br />
and alkali resistances. This thixotropic latex imparts a pseudoplastic rheology and<br />
has high reactivity with associative thickeners.<br />
Typical Properties <strong>UCAR</strong> <strong>Latex</strong> D-<strong>70</strong><br />
Solids 50 ± 1 %<br />
pH Value 7.0 -9.0<br />
Viscosity , mPa.s<br />
6000 - 12000<br />
(Brookfield LVT Spindle 4 /30 rpm)<br />
Particle size,microns Approx. 0.1<br />
MFFT 20 - 24° C<br />
Stabilisation Anionic<br />
Features<br />
• APEO free latex<br />
• Good wet scrub resistance<br />
• Good gloss development<br />
• Combination of toughness and flexibility<br />
• High pigment binding capability<br />
• Excellent formulating latitude<br />
• Excellent electrolyte stability<br />
• Excellent water and alkali resistances<br />
• Excellent freeze-thaw and mechanical stability<br />
• Pseudoplastic rheology and high reactivity with associative thickeners<br />
EUR 309-00182
Formulations<br />
Exterior Wall Matt Paint EXMATT<strong>70</strong>/01 Interior Matt Paint INMATT<strong>70</strong>/02<br />
Raw Material Weight Raw Material Weight<br />
A. Load according to sequence of addition under A. Load according to sequence of addition under<br />
agitation. Grind to fineness 7 - 8 NS.<br />
agitation. Grind to fineness 7 -8 NS<br />
Water 34.60 Water 31.31<br />
CELLOSIZE QP100MH 0.38 CELLOSIZE QP100MH 0.43<br />
Ammonia (28%) 0.10 Ammonia (28%) 0.18<br />
TERGITOL NP-10 0.25 TERGITOL NP-10 0.25<br />
<strong>UCAR</strong> R40N 0.50 <strong>UCAR</strong> R40A 0.50<br />
Acticide BXH 0.15 BYK 036 0.23<br />
PROPYLENE GLYCOL 1.43 Acticide BXH 0.15<br />
BYK 036 0.20 Titanium Dioxide R<strong>70</strong>6 5.50<br />
Ti-Pure R900 6.33 Talc 6.00<br />
Talc 10.00 Calcium Carbonate Socal P2V 10.00<br />
Calcium Carbonate 400M 15.95 Calcium Carbonate 2JL 33.65<br />
Calcium Carbonate 500M 15.95<br />
B. Let down in order at moderate speed of<br />
agitation. Mix for 5 - 10 minutes.<br />
B. Let down in order at moderate speed of agitation.<br />
Mix for 5 -10 minutes.<br />
<strong>UCAR</strong> FILMER IBT 1.00 <strong>UCAR</strong> FILMER IBT 1.20<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 12.46 PROPYLENE GLYCOL 1.00<br />
Mineral Spirit 0.50 <strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 8.00<br />
Ammonia (28%) 0.10 Parmetol DF19 Forte 0.50<br />
BYK 036 0.10 Mineral Spirit 0.20<br />
EUR 309-00182<br />
Ammonia ( 28% ) 0.20<br />
Total 100.00 BYK 036 0.20<br />
Total 100.00<br />
PVC 75.0 % PVC 85.0 %<br />
Weight Solids 55.0 % Weight Solids 60.0 %<br />
Weight Volume 32.0 % Volume Solids 38.0 %<br />
Krebs Stormer 103 Specific Gravity 1.55 ± 0.02<br />
pH Value 9.01 pH Value 8.5-9.5<br />
ICI Cone & Plate 2.1 P Krebs Stormer 125 ± 5<br />
Specific Gravity 1.46 ±0.02 Gloss @60° leneta paper 0 - 5 %
Formulations<br />
Semi Gloss Wall Paint SMG<strong>70</strong>/01 Wall Sealer Paint WS<strong>70</strong>/01<br />
Raw Material Weight Raw Material Weight<br />
A. Load according to sequence of addition under A. Load according to sequence of addition under<br />
agitation. Disperse and grind to fineness.<br />
agitation. Disperse and grind to fineness 7 -8 NS<br />
Water 19.46 Water 30.44<br />
TERGITOL NP-10 0.20 TRITON X100 0.18<br />
<strong>UCAR</strong> R40A 0.20 <strong>UCAR</strong> R40A 0.26<br />
Acticide BXH 0.12 Bevaloid 680 0.15<br />
BYK 036 0.29 SodiumHexametaphosphate 0.10<br />
CELLOSIZE QP 100MH 0.12 CELLOSIZE QP 15000H 0.45<br />
Ammonia (28%) 0.20 Ammonia (28%) 0.13<br />
Ti-Pure R900 20.65 Ti-Pure R 902 24.20<br />
B. Let down in order under moderate speed of<br />
agitation. Mix for 5-10 minutes.<br />
<strong>UCAR</strong> FILMER IBT 1.45<br />
EUR 309-00182<br />
Calcium Carbonate <strong>70</strong>0M 3.82<br />
B. Let down in order under moderate speed of<br />
agitation. Mix for 5-10 minutes<br />
PROPYLENE GLYCOL 1.47 <strong>UCAR</strong> FILMER IBT 1.43<br />
Mineral Spirit 0.29 PROPYLENE GLYCOL 0.50<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 53.32 Parmetol DF35 0.15<br />
Ammonia (28%) 0.29 Parmetol DF Forte 1.71<br />
BYK 036 0.20 <strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 36.33<br />
C. Premix water & D-31 then add slowly under<br />
slow agitation. Mix until homogenous liquid.<br />
Bevaloid 680 0.15<br />
Water 1.39 Total 100.00<br />
<strong>UCAR</strong> THICKENER D-31 0.35<br />
Total 100.00<br />
PVC 30.0 %<br />
Weight Solids 48.4 %<br />
PVC 18.0 % Specific Gravity 1.29 ± 0.02<br />
Weight Solids 49.5 % pH Value 8.5 - 9.5<br />
Specific Gravity 1.22 ± 0.02 Krebs Stormer 96<br />
pH Value 8.5 - 9.5 ICI, Cone & Plate,P 0.85<br />
Krebs Stormer 85<br />
ICI, Cone & Plate,P 1.0<br />
Gloss @60° 60 ± 5 %
Formulations<br />
Texture Coarse Paint TXC<strong>70</strong>/01 Roof Coating Paint RC<strong>70</strong>/01<br />
Raw Material Weight Raw Material Weight<br />
A. Load according to sequence of addition and<br />
A. Load according to sequence of addition under<br />
disperse under agitation.<br />
agitation. Disperse to fineness.<br />
Water 14.56 <strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 35.26<br />
<strong>UCAR</strong> R40A 0.20 TERGITOL NP-10 0.20<br />
TERGITOL NP-10 0.10 <strong>UCAR</strong> R40A (40%) 0.20<br />
Parmetol DF35 0.12 BYK 036 0.29<br />
CELLOSIZE QP 100MH 0.48 Ti-Pure R900 1.08<br />
Ammonia (28%) 0.12 Calcium Carbonate SocalP2V 3.60<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 16.00 Calcium Carbonate 2JL 16.80<br />
PROPYLENE GLYCOL 1.00<br />
TiO2 PGG 128 1.32 B. Let down in order at moderate speed of<br />
Silica Sand 36.00 agitation. Continue agitation.<br />
BYK 036 0.30 <strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 25.21<br />
B. Let down in order at moderate speed of agitation. <strong>UCAR</strong> FILMER IBT 3.60<br />
Mix for 5-10 minutes. PROPYLENE GLYCOL 0.96<br />
<strong>UCAR</strong> FILMER IBT 1.20 Ammonia(25%) 0.43<br />
MIneral Spirit 0.20 Acticide BXH 0.12<br />
Parmetol DF19 0.50<br />
BYK 036 0.30<br />
Quartz 27.60<br />
EUR 309-00182<br />
C. Premix water and D-31 then add slowly under<br />
slow agitation. Mix until homogenous liquid.<br />
Water 11.20<br />
Total 100.00 <strong>UCAR</strong> THICKENER D-31 1.05<br />
BYK 036 0.29<br />
Total 100.00<br />
PVC 80.0 % PVC 22.0 %<br />
Weight Solids 76.0 % Weight Solids 52.0 %<br />
Volume Solids 55.0 % Specific Gravity 1.20±0.02<br />
Specific Gravity 1.<strong>70</strong>± 0.02 Krebs Stormer 125<br />
pH Value 8.5 - 9.5 ICI Cone & Plate, P 1.65<br />
Roller Application Excellent % Elongation 919
Formulations<br />
Gloss Texture GTX<strong>70</strong>/01<br />
Raw Material Weight<br />
A. Load according to sequence of addition under<br />
agitation. Disperse and grind fineness.<br />
Water 19.40<br />
TERGITOLNP-10 0.15<br />
<strong>UCAR</strong> R40A 0.15<br />
Acticide BXH 0.15<br />
BYK 036 0.30<br />
CELLOSIZE QP100MH 0.44<br />
Ammonia(28%) 0.21<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 25.60<br />
Titanium Dioxide R900 18.00<br />
B. Let down in order under moderate speed of<br />
agitation.<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> (50%) 29.52<br />
<strong>UCAR</strong> FILMER IBT 2.50<br />
PROPYLENE GLYCOL 0.<strong>70</strong><br />
MINERAL SPIRIT 0.20<br />
Byk 036 0.15<br />
C. Premix water and D-31 then add slowly under slow<br />
agitation. Mix until homogeneous liquid.<br />
Water 1.76<br />
<strong>UCAR</strong> THICKENER D-31 0.48<br />
Total 100.00<br />
PVC 15.0 %<br />
Weight Solids 47.0 %<br />
Specific Gravity 1.20±0.02<br />
Krebs Stormer 141<br />
Gloss @60° 60 ± 5<br />
Raw Material List<br />
EUR 309-00182
Raw Material List Functions Suppliers<br />
Acticide BXH Preservative Thor Chemicals<br />
BYK 036 Defoamer BYK Chemie<br />
Bevaloid 680 Defoamer Rhodia<br />
CELLOSIZE QP 30000H Cellulosic Thickener THE DOW CHEMICAL CO.<br />
CELLOSIZE QP 15000H Cellulosic Thickener THE DOW CHEMICAL CO.<br />
CELLOSIZE QP 100MH Cellulosic Thickener THE DOW CHEMICAL CO.<br />
Calcium Carbonate Socal P2V Extender Solvay<br />
Calcium Carbonate 2JL Extender JCC Co.<br />
Calcium Carbonate 600M Extender ECC<br />
China Clay B Clay English China Clay<br />
Silica Sand Extender JCC Co.<br />
Quartz Extender JCC Co.<br />
Talc Filler Finnmineral<br />
PROPYLENE GLYCOL Glycol THE DOW CHEMICAL CO.<br />
TRITON X100 Surfactant THE DOW CHEMICAL CO.<br />
TERGITOL NP-10 Surfactant THE DOW CHEMICAL CO.<br />
Cristal PGG 128 Titanium Dioxide Cristal<br />
Ti_Pure R902 Titanium Dioxide Dupont<br />
T-Pure R900 Titanium Dioxide Dupont<br />
Titanium Dioxide R<strong>70</strong>6 Titanium Dioxide Dupont<br />
<strong>UCAR</strong> R-40A, 40N Dispersant THE DOW CHEMICAL CO.<br />
<strong>UCAR</strong> FILMER IBT Coalescent THE DOW CHEMICAL CO.<br />
Parmetol DF19 Forte Fungicide/Preservative Schulke & Mayr<br />
Parmetol DF35 Fungicide/Preservative Schulke & Mayr<br />
<strong>UCAR</strong> LATEX D-<strong>70</strong> Binder THE DOW CHEMICAL CO.<br />
<strong>UCAR</strong> THICKENER D-31 Acrylic Thickener THE DOW CHEMICAL CO.<br />
Ammonia (28%) Neutralising Base VOS B.V.<br />
Mineral Spirit Co-Solvent SISCO Co. Ltd.<br />
EUR 309-00182