The MGV Fork.

MGV
CARBON
FORK
Seido - Bicycle Components

MGV
CARBON
FORK
With the experience we gathered with our
popular Bombtrack EXT V1 and V2 forks, and
the collective feedback of our customers we
have developed a new gravel / adventure fork
from the ground up. A lot of time and effort went
into the development where we carefully chose
every detail and feature according to what we
learnt from the riders needs and expectations in
a carbon gravel and adventure fork which we
proudly think is the most feature-packed to date.
The modern geometry allows it to be retro-fitted
to many bikes including the Bombtrack Hook
and the Beyond ranges.

Both Bombtrack and
Seido designs available
03

MATERIAL
Full UD
Carbon fiber
OFFSET
53 mm
AXLE TO
CROWN
410 mm
A
WEIGHT
530 g /
1.17 lbs
B
A
B
Full UD Carbon
fiber construction
for low weight,
heigh stiffness and
durability
Tested according
to both ISO road and
MTB specifications
to ensure maximum
strength

05
A
B
TIRE
CLEARANCE
27.5“
Up to 2.5”
TIRE
CLEARANCE
29”
Up to 2.25“
A
B
Multiple options
for head light and
fender mounting
available
Crown design offers
a huge tire clearance
of 29“ × 2.25“ or
27.5” × 2.5“

MAX LOWRIDER
LOAD
20 kg / 44 lbs
MAX LOAD
TRIPLE CAGE
53 mm
ASTM
CLASS
2
A
With rack mounts
embedded in the
Carbon layup in a
special process, this
fork can support the
forces of lowrider
racks — perfectly
fits the Tubus Tara
B Triple cage mounts for
cargo or bottle cages

07
B
A

STEERER
Tapered,
1–1/8” – 1–1/2”,
300 mm length
S.H.I.S.
DIMENSIONS
28.6 | 40 mm
(Steerer tube top Ø |
Crown Race Ø)
B
A
A
Cable exit port at the
crown to power head
lights. Fits standard
oval Di2 grommets
B
Steerer Tube hole
enables retro-fit in
fully-internal routing
frames to both
route brake and
rear light cables
C
C
Internal housing
through fork leg for
clean aesthetics

09
B
A
C
BRAKE
MOUNT TYPE
Flat Mount 160,
applicable rotor
Ø 160–180 mm
THROUGH
AXLE TYPE
12 × 100 mm
OLD
100 mm
A
B
C
Flat mount 160 allows
for up to 180 mm rotor
size, offering better
braking performance
Dynamo cable port
accepts standard oval
Di2 grommets for clean
cable routing
Dedicated fender and
lowrider rack mounts

DATA
SHEET
MATERIAL
Full UD
Carbon fiber
STEERER
Tapered,
1-1/8”–1-1/2”,
300 mm length
S.H.I.S.
DIMENSIONS
28.6 | 40 mm
(Steerer
tube top Ø|
Crown Race Ø)
OFFSET
53 mm
AXLE TO
CROWN
410 mm
OLD
100 mm
BRAKE
MOUNT TYPE
Flat Mount 160,
applicable rotor
Ø 160–180 mm
1
Always use a medium strength thread
lock compound for rack / cage bolts as
these tend to vibrate and can work the
bolts loose.

CABLE
ROUTING
Brake
internally
(also for
fully internal
routing),
Dynamo Cable
internally
TIRE
CLEARANCE
58—622
(29“× 2.25“) /
64—584
(27.5“— 2.5“)
THROUGH
AXLE TYPE
TA,12 × 100 mm
THROUGH AXLE
LENGTH TOTAL
120 mm
THROUGH
AXLE THREAD
M12 × 1.5
MIN.
THREAD LENGTH
14 mm
MAX. LOADS
AND TORQUE
EXPANDER
8 Nm
STEM
5—6 Nm
THROUGH AXLE
10 Nm
BRAKE MOUNT
BOLTS
8 Nm
RACK AND
CAGE MOUNTS 1
5 Nm
THREAD INSERT
THROUGH AXLE
2 Nm
MAX. LOAD
TRIPLE CAGE 2
4.5 Kg
MAX. LOAD
PER CAGE MOUNT
1.5 Kg
MAX. LOAD
LOWRIDER
RACK MOUNTS 3
5 Kg
11
2
Applicable for cages that are
mounted with three bolts.
3
Lowrider mounts at the dropout and middle
eyelet of the triple cage mount. Max load
of 20 kg applies when using a lowrider rack
that is connected to both sides of the fork
and mounted to all 4 eyelets. When using
single-sided individual lowrider racks each
side can support max. 10 kg.

Richard-Byrd-Str. 12
50829 Cologne, GER
wemakethings.de
Seido - Bicycle Components