ALU NL_Aug11_engl NEU:Layout 1 - ALUMINIUM 2012

Sailing full steam ahead for an upturn in growth 

Markus M. Jessberger, 

Event Director 

ALUMINIUM 

Markus M. Jessberger 

Event Director ALUMINIUM 

“At full capacity” and “heading for a new record”: The first six months of the year set 

clear trends which allow the aluminium industry to look forward yet again to a very 

good annual result. A ten per cent increase in the global production of primary aluminium 

and a probable tonnage of 44.6 million tons for the whole year confirms that 

the worldwide industry is sailing full steam ahead towards an upturn in growth. 

The forecasts, including the latest from the British CRU Group, continue to give us 

cause for optimism, even where the growth rates in individual regions and branches of 

industry differ quite considerably. For Western Europe with a growth rate of 3.3 per 

cent, for Eastern Europe with 6.6 per cent and for Asia with 10.9 per cent. The transport 

sector (+ 10%), the aviation industry (+ 9%) and civil engineering and machine 

building (+ 8%) continue to be the most significant factors to drive growth. 

The association of ALUMINIUM trade fairs is also sailing full steam ahead; an association which we have 

positioned, as a global trade fair partner of the aluminium industry, one by one since 1997 in the core 

regions worldwide. Just a few weeks ago, ALUMINUM CHINA, which noted very lively demand, was 

especially satisfactory and busy; in Dubai most of the exhibitors considered the outcome of the fair to 

have been very positive. 

The mother of all aluminium trade fairs, ALUMINIUM 2012 in Düsseldorf is currently heading for a new 

record. Today, one year before it opens its doors, the fair is already 10 per cent larger than at the start 

of last year’s ALUMINIUM. Three of the six halls, are already “at full capacity”, whilst there are only a 

limited number of the most attractive spaces still available in the other three halls. 

In Brazil, there has frequently been talk of a lost decade. The indications now are that this South American 

giant will become a super power. The start of a new era, in which German and European companies 

are increasingly participating. 

We are intensifying our event activities in one of the most important regions worldwide for the aluminium 

industry with International ALUMINIUM BRAZIL, which will take place in line with EXPOALUMÍNIO from 

April 24 to 26, 2012. With this, we are offering you a targeted entry into one of the most dynamic, 

world-class markets. Just be there. 

Combining with aluminium 

Welding and Joining Pavilion at ALUMINIUM 2012 

Since 2006, companies involved in the sectors of plants, machinery, accessories and equipment for joining, 

separating and coating of aluminium were present in the Welding and Joining Pavilion. Since its introduction, 

the pavilion has become established amongst exhibitors and visitors and has actually 

doubled in size. Around 10 exhibitors will present their innovations in 2012 on 200 m². Compared to an 

individual participation at the fair participation in the pavilion offers the following additional services: 

High-quality turnkey stand; Information counter with hostess; Common catering area (including 

catering voucher); Additional, target group specific marketing. 

New in 2012: In cooperation with DVS (German Welding Society) and DVS Media, a presentation area will 

be created next to the pavilion, on which a high-calibre range of lectures will be provided on all three days. 

All exhibitors of the Welding and Joining Pavilion 2010 have already booked or confirmed their participation 

for the pavilion in 2012. 

Are you interested in exhibiting in the pavilion or do you require further information? For any queries or 

a non-binding stand proposal please contact Ms Dahinten on +49 (0)211 90191 104 or by email to 

Hilke.Dahinten@reedexpo.de. 

Organiser: Institutional Partner: Partner: 

9th World Trade Fair & Conference 

ALUMINIUM 2012 

9 - 11 October 2012, Messe Düsseldorf 

September 2011 

www.aluminium-messe.com 

COMPOSITES EUROPE 2011 

Companies involved in the composites 

industry and their applications 

are on display at COMPOSITES 

EUROPE 2011 from 27-29 September. Amongst 

these are also exhibitors from the ALUMINIUM 

trade fair. Further information is available on 

page 5. 

Content 

Page 2: Industry News 

European Aluminium Congress 2011, 

Transport-website of IAI 

Page 3+4: ALUMINIUM Global News 

ALUMINIUM INDIA 2011, ALUMINIUM CHINA 2011, 

New: ALUMINIUM BRAZIL 2012, 

ALUMINIUM MIDDLE EAST 2013 

Page 5: Trade Fair News 

Competence Centre Surface Technology, 

ALUMINIUM likes Social Media, 

News of „The Bright World of Metals“, 


Page 6: Exhibitor News 

Seminar “Successfully organizing foreign fairs”, 

Presentation IBA, Product innovation Alcoa 

Page 7+8: Exhibitor List 2012 

Exhibitor list of ALUMINIUM 2012, 

Facts and Figures, Contacts, Imprint 

Exhibitor Statement 

„In 2012, Heinz Soyer is taking part at the ALUMI- 

NIUM fair for the 7th time. After successfully introducing 

the Welding Pavilion in 2006, we were 

sure: This will be our platform for the next fair. The 

decision was rewarded: The visitors from our segment 

come specifically to the Welding and Joining 

Pavilion. This way, we always reach our target 

group.“ 

Heinz Soyer sen., Managing Director, 

Heinz Soyer Bolzenschweisssysteme GmbH 

1

Industry News 

2 



Defining the industry. Shaping its future. 


European Aluminium Congress 2011: 

“Technologies for the Aluminium Industry“ 

As partner of Reed Exhibitions, the Gesamtverband 

der Aluminiumindustrie e.V. (GDA) has been 

the ideal supporter of the global exhibition “ALU- 

MINIUM” since 1997. Because of its connections 

in the worldwide aluminium industry, GDA has 

been an experienced seminar and congress organizer 

for many years. In 2010, the association organized 

the first congress accompanying ALUMINIUM. 

GDA’s successful series of congresses will continue 

this year as it holds the European Aluminium 

Congress 2011 “Technologies for the Aluminium 

Industry” on 22 and 23 November 2011 in Düsseldorf, 

where numerous experts from the national 

and international aluminium industry are expected. 

What innovative technologies do the suppliers to 

the aluminium industry have to offer? Will new 

methods, processes or developments in materials 

open up new markets for aluminium? Which 

trends can be observed? These are the central 

220 participants have joined the lectures at the European 

Aluminium Congress 2009. 

questions of the international trade congress, and 

will be discussed by the experts from the aluminium 

industry and their suppliers and equippers. 

The target groups of the congress are smelters, 

producers of semi-finished products, foundries, 

processors, traders in metal and semi-finished 

products, as well as research institutes. The congress 

will be held in English and offers suppliers 

and technology partners of the aluminium producing 

and processing industry a comprehensive 

platform to present and discuss their new developments. 

In his keynote address, Oliver Bell, Vice 

President of the GDA and Executive Vice President 

Rolled Products of Norsk Hydro ASA is convinced 

that “aluminium is the solution of the future”. 

The European Aluminium Congress “Technologies 

for the Aluminium Industry” is divided into a total 

of six sessions. The topics of these sessions are 

application-oriented process technologies, machinery 

and plant engineering, heat treatment, software 

and simulation, recycling and melting, and 

measurement, control and sensor technologies. 

Renowned speakers from international companies 

will offer information and real-life examples in all 

the sessions of the congress. Among others the 

speakers will include Axel Bauer of SMS Meer 

who will talk in the session on machinery and plant 

engineering about extrusion presses for large scale 

profiles. Gaspar Fernandez Roldán, GIA Clecim 

Press, and Christoph Deiters, Gerhardi Alutechnik 

GmbH, will describe the European cooperation at 

the company in the construction of a new extrusion 

press. Rainer Neukant of Achenbach Buschhütten 

will describe new developments in aluminium strip 

rolling technology. Dr. Dan Dragulin of Belte AG 

will present a new generation of heat treatment systems 

for aluminium components. The Institute of 

Forming Technology and Lightweight Construction 

(IUL) of the TU Dortmund will inform about 

the simulation of burrs on extrusion press profiles. 

A variety of detailed information on different topics 

will be presented in an exhibition accompanying 

the congress, and companies in the branch will be 

presenting process and supply technologies for 

the aluminium industry. 

The participation fee for the congress is EUR 970 

plus VAT. The registration forms and further information 

about the congress can be found at the 

congress website www.aluminium-congress.com. 

Georg Grumm will answer further questions or 

provide information, and can be contacted at tel. 

+49 (09211 4796 160, or by email: 

Georg.Grumm@aluinfo.de. 

The future moves with aluminium: 

http://transport.world-aluminium.org 

The International Aluminium Institute 

(IAI) Chairman Svein Richard Brandtzæg 

welcomed the launch of the IAI 

product-related sustainability website 

highlighting the advantages of the use of aluminium 

in transport. Recognising the demand from 

car manufacturers (OEMs) and consumers around 

the world for up-to-date and easy to access information, 

IAI has developed an online resource on 

the unique properties of aluminium transport 

applications, as well as their fuel efficiency and 

emissions reduction benefits. 

The website features some of the world’s leading 

OEMs and their innovative use of aluminium components 

in the design of safe, lightweight, fuel 

efficient and cost effective vehicles. It also provides 

credible and accurate life cycle data, which 

underpin and support the aluminium industry’s sustainability 

and the sustainability of its products. 

Commenting on the website, Mr. Brandtzæg said 

“Through its light weight, versatility, durability and 

The website of IAI offers information about the use of 

aluminium in the transport industry. 

recyclability, aluminium is a material that is increasingly 

being employed in safe, stylish, cost effective 

and energy efficient vehicles. Providing 

vehicle manufacturers and consumers with information 

on the environmental performance of applications 

in use is essential for making informed 

material choices – this website is a one-stop-shop 

for such information and for real life examples of 

aluminium-intensive, lightweight, energy efficient 

vehicles.” 

Find here the latest websites of the International 

Aluminium Institute (IAI): 

http://transport.world-aluminium.org 

http://recycling.world-aluminium.org 

http://greenbuilding.world-aluminium.org

ALUMINIUM Global News 





ALUMINIUM INDIA 2011 

3 months to go: Don’t miss out on an exclusive Indian Aluminium business opportunity! 

The leading B2B trade event for the Indian aluminium 

eco-system and its application industries, 

ALUMINIUM INDIA is the only platform that brings 

together producers, processors, technology suppliers 

and consumers along the entire value chain 

- i.e. from raw materials through to semi-finished 

and finished products. 

This is your opportunity to personally connect with 

Indian and international decision makers from 

across industry segments. Network, exchange ideas, 

share knowledge, discover the latest innovations 

and develop strategic business alliances. This year's 

edition will feature around 150 exhibitors including 

Redex, Urja Products Pvt. Ltd., Siddharth 

Industries, Manaksia Limited, Surtec Chemicals 

India Pvt. Ltd., LOI Wesman Thermprocess Pvt. 

Ltd., Jiwanram Sheoduttrai Group, Wagstaff, Inc., 

Pyrotec Inc., SAPA AB, Granco Clark Inc., ZPF 

therm Maschinenbau GmbH and many more. 

The ALUMINIUM INDIA Conference will consist of 

six cutting edge tracks featuring globally renowned 

speakers who will offer insights into current trends 

and the emerging future of Aluminium and its ever 

important role in the application sectors it serves. 

A special highlight this year is our 2010 EUROPEAN 

ALUMINIUM AWARD Winner's Showcase. 

Do not hesitate to contact Ms Dahinten by phoning 

her on +49 (0)211 90191 104 or mailing her at 

Hilke.Dahinten@reedexpo.de for a non-binding 

stand proposal. 

For more information on the show or to register 

as a visitor to ALUMINIUM INDIA 2011, please 

visit www.aluminium-india.com. 

ALUMINIUM CHINA 2011 

With a record high attendance number of 370 exhibitors and 11,282 trade vistitors 

ALUMINIUM CHINA closed its doors on 15th July. 

July 13 to 15, 2011, the 7 th presentation of ALU- 

MINIUM CHINA opened its gate at Shanghai New 

International Expo Centre (SNIEC) to embrace 

the 370 exhibiting companies from all over the 

world. The 3-day event proved itself truly Asia’s 

No. 1 by a record high attendance number - 

11,282 trade visitors from 83 countries, amongst 

which 1,244 are coming from overseas - respectively 

increased by 25% and 76% compared to last 

edition! 

Alongside the showcase of a complete supply chain 

of aluminium industry, INDUSTRIAL MATERIALS 

CHINA incorporating the Asian version of COM- 

POSITES EUROPE – COMPOSITES CHINA jointly 

launched by Reed Exhibitions Germany and China 

is for the first time introduced on the same show 

floor, offering a synergetic opportunity for specialists 

sourcing diversified solutions from non- 

ferrous (copper, magnesium) and composite materials. 

With this expansion, ALUMINIUM CHINA 

solidly makes a first step to become Asia’s leading 

materials solution sourcing platform. 

Around 150 exhibitors are expected to present their products 

at ALUMINIUM INDIA 2011 in Mumbai. 

In addition to stand showcase and networking, the 

concurrent technical seminars, forums and other 

theme activities offered the visitors chances to 

learn about the latest know-how and professional 

experience in various segments. The second edition 

of SAE Asia Congress also shed lights on the latest 

developments in material solution for lightweight 

and new-energy automotives, showing 

overwhelmingly positive trends in emerging application 

segments. 

The next edition of ALUMINIUM CHINA will take 

place on June 6 to 8, 2012, at Shanghai New 

International Expo Centre. 

Further information you find at 

www.aluminiumchina.com. 

For any questions or a non-binding stand proposal 

please contact Ms. Kristian or Ms. Dahinten at 

+49 (0)211-90191 104/ 232 or via email at 

Hilke.Dahinten@reedexpo.de or 

Jessica.Kristian@reedexpo.de. 

EUROPEAN ALUMINIUM AWARD at 


The EUROPEAN ALUMINIUM 

AWARD travelled far this year. 

It was represented with an information 

stand in Dubai and China and in India it 

will be given an especially large area. The following 

winning companies from 2010 will be on display 

in Mumbai with examples of products and explanatory 

panels: VANMOOF, Van Campen Industries, 

ANOX/Itho, Farsund, Zmag, Solar Car and 

Ritter. 

Take part and travel the world with your product 

and the EUROPEAN ALUMINIUM AWARD 2012. 

Further information is available at 

www.aluminium-award.eu/2012. 

The record high attendance number of 11,282 trade 

visitors has been visible even in the entry hall. 

A glance on the aisles – international attendance and 

busy talks 

3

ALUMINIUM Global News 

4 





ALUMINIUM BRAZIL 

From Düsseldorf to Shanghai and Mumbai, on to Dubai and from 2012 on to Sao Paulo. 

ALUMINIUM, the world’s leading trade fair partner 

for the aluminium industry, once more extends 

its global activities. Starting next year, it offers 

you access to yet another important growth market 

for the aluminium industry with an event in Brazil. 

In line with EXPOALUMÍNIO, which will be held 

from 24 to 26 April 2012 in Sao Paulo, international 

companies will have the opportunity to take 

part in International ALUMINIUM BRAZIL. 

As a growing economical superpower, Brazil – 

third largest supplier of bauxite in the world 

and, with an output of 1.6 million tons the number 

7 among primary aluminium producers – holds 

a key position on the South American continent 

also in aluminium production and processing. 

EXPOALUMÍNIO, organised by Reed Exhibitions 

Alcantara Machado and the Brazilian aluminium 

association ABAL, and bringing together 120 exhibitors 

and more than 10,000 trade visitors on 

an exhibition area of 5,000 sqm, is one of the 

most important meeting places for the aluminium 

industry on the American continent. Like the other 

trade fairs of the ALUMINIUM family, the EXPOA- 

LUMÍNIO’s exhibition spectrum covers all aspects 

of the value chain. 

The visitor profile of ALUMINIUM BRAZIL composed 

as follows: 

- aluminium producing and processing industry 

- metal working and processing industry incl. 

surface treatment 

- automotive (cars, commercial vehicles) 

- transport (railway, ship and aircraft building) 

- engineering 

- electrics and electronics 

- building and construction 

- packaging and consumer durables 

Opportunities for participation: Within this wellestablished 

event, International ALUMINIUM 

BRAZIL offers both individual stand areas and a 

pavilion package for international exhibitors. For 

the individual stand areas, the choice is between 

a system stand provided by the organisers or an 

own stand construction. The “International Pavilion” 

offers a complete package including a comprehensive 

range of services – the perfect solution 

for a smooth and efficient trade fair presentation. 

Stand areas (from 9 sqm on) – you can book for 

410.00 US $ per sqm plus ancillary costs. 

The Pavilion Package includes following services: 

- High-quality, uniform stand design 

- Lounge Area for use for conferences incl. 

catering 

- Computer with Internet access at the Lounge 

Area 

- Inclusion in special advertising activities for 

the “International Pavilion” 

- Stand service provided by the stand building 

partner and the ALUMINIUM team 

The prices for the “International Pavilion” as well 

as for the shell scheme will be published soon at 

www.aluminium-brazil.com. 

For further information please contact Ms Kristian 

or Ms Dahinten at +49 (0) 211-90191-232/104 or 

email to Jessica.Kristian@reedexpo.de resp. 

Hilke.Dahinten@reedexpo.de. 

With ALUMINIUM BRAZIL (24-26 April 2012) Reed Exhibitions adds the South American continent to its portfolio. 

ALUMINIUM DUBAI will become 

ALUMINIUM MIDDLE EAST 

ALUMINIUM DUBAI, which was held 

this year for the second time from 

May 9 to 11, was a complete success 

with 177 exhibitors and around 

3,000 visitors. Most of the visitors came from all 

over the Middle East, in particular from the Gulf 

States and also North Africa. To raise the level of 

awareness for the profile of the fair as the leading 

meeting place for business throughout the Gulf 

Region and in the neighbouring countries, the 

event will be held next time as ALUMINIUM 

MIDDLE EAST. Dubai will continue to be the location 

for the event. ALUMINIUM MIDDLE EAST will 

be held 23–25 April 2013. 


www.aluminium-middleeast.com. 

Dubai will continue to be the location for ALUMINIUM 

MIDDLE EAST in 2013. 

Tremendous success for the Quartet of 

Technological Trade Fairs 

GIFA, METEC, THERMPROCESS and 

NEWCAST 2011, which jointly trade 

with ALUMINIUM 2012 under the 

umbrella brand “The Bright World of 

Metals”, concluded at the beginning of July with 

new visitor and exhibitor records. 1,958 exhibitors 

from around the world met 79,000 visitors in 

Düsseldorf from 106 countries. The fairs thus impressively 

confirm their position as the leading international 

fairs in their industries. 

Especially, the highly international nature amongst 

exhibitors and visitors demonstrates the worldwide 

demand for these trade fairs. Over 54 per 

cent of visitors came to Düsseldorf from Europe 

and to a considerable extent from overseas. The 

ALUMINIUM team was also represented with a 

stand and presented the Global ALUMINIUM 

Portfolio. 

ALUMINIUM 2012 is associated to “The Bright 

World of Metals”. 


www.thebrightworldofmetals.com.

Trade Fair News 





Design meets functionality 

Competence Centre Surface Technology at ALUMINIUM 2012 

For many years, the Surface Pavilion, supported by 

the Association for the Surface Finishing of Aluminium 

e.V. (VOA), has been an integral part of the 

ALUMINIUM trade fair and a contact point for 

visitors looking for solutions in surface machining, 

finishing and coating for various industries, e.g. 

automotive, civil engineering and building or 

machine and plant construction. 

For ALUMINIUM 2010, a Pavilion for Piecework 

Coating was introduced for the first time, aided by 

GSB International (Gütegemeinschaft für Stückbeschichtung 

e.V.). 

For ALUMINIUM 2012, GSB International and 

VOA have joined forces so as to establish a contact 

point for the topic of surface finishing at the 

trade fair, the “Competence Centre for Surface 

Technology”. 

This is a shared area of almost 1,000 m², on 

which 30 exhibitors will be on display. The special 

feature here: Apart from participating in the Full 

Service Package, with a turnkey stand (12-24 

m²), there is the possibility for exhibitors, who 

would like to have more space (30-48 m²) and an 

individual presentation within the shared stand, 

to register for a Basic Package. This consists of a 

ALUMINIUM likes SOCIAL MEDIA 

Make your presence felt via social media and directly contact your target group! 

The ALUMINIUM trade fair can be reached via all 

social media channels: Become a member of the 

ALUMINIUM Groups on XING, FACEBOOK, LINKE- 

DIN and TWITTER. 

Discuss the most diverse topics to do with aluminium 

as a material. Share your experience with 

experts, present your company in the world of 

social networks and quickly make new contacts! 

Always be informed when new exhibitors register 

for ALUMINIUM 2012 and ensure that you do 

not miss out on the latest news about our ALUMI- 

NIUM shows in Shanghai, Dubai, Mumbai and Sao 

Paulo. 

Send us your interesting articles about your products 

or services in the aluminium sector and we 

will publish these on our social media channels. 

We look forward to your visit to our 

ALUMINIUM fan pages! 

basic structure as well as a cabin, whilst anything 

else can be individually designed by the exhibitor. 

Like in the Welding and Joining Pavilion, a presentation 

forum will also be held alongside to the 

Competence Centre for Surface Technology. The 

programme of this forum will be arranged by 

VOA and GSB International. 

Companies that have already registered: 

NABU Oberflächentechnik GmbH; HD Wahl 

GmbH; Aucos Elektronische Geräte GmbH; 

Akzo Nobel Powder Coatings GmbH; STOZ GmbH; 

Omya (Schweiz) AG; Clariant International AG; 

plating electronic GmbH; CHEMAL GmbH & 

Co.KG; Albea GmbH; Munk GmbH; Chemetall 

GmbH; IGP Pulvertechnik AG 

Registering for a stand in the pavilion is reserved 

for the member companies of both associations 

until 30th September 2011, thereafter the area 

will also be open for non-members. If you are 

interested in participating in the pavilion, please 

contact Ms Dahinten on +49 (0)211 90191 104 or 

email Hilke.Dahinten@reedexpo.de who will be 

pleased to be of assistance. Further information is 

also available at www.aluminium-messe.com. 

We are interested in your 

aluminium product! 

Win two VIP Tickets for ALUMINIUM 2012 

in Düsseldorf and a book about the diversity 

of aluminium as a material. 

And this is how it works: 

1. On www.facebook.com/ALUMINIUMMESSE 

click on “like” 

2. Upload your favourite picture on the “Picture 

competition” tab. (e.g. an aluminium tool 

or work of art or a machine that produces 

aluminium products, etc., etc., etc., - no limits 

are set on your creativity.) 

3. Provide a small “descriptive text” for the picture 

4. The picture with the most „like“ clicks wins 

the competition. 

We wish you good luck and look forward to loads 

of great photos of your aluminium products. 

Exhibitor Statement 

„For the third time we are exhibiting at ALUMI- 

NIUM together with the company Clariant, and for 

the third time we have registered our participation 

in the Surface Pavilion. For us and our customers, 

the combination of high-quality shell scheme with 

individual elements as well as all-round support, 

including catering is perfect.“ 

Andreas van Baerle, 

Head of Business Unit Aluminium Finishing, 

Omya (Schweiz) AG 

Partner Statement 

„We are convinced that both exhibitors and visitors 

will benefit from the presentation by GSB International 

and VOA in the Competence Centre Surface 

Technology at ALUMINIUM 2012. In 2012 they will 

find all the expert knowledge in the surface treatment 

and piecework coating segment concentrated 

in a single area. Furthermore, state-of-the-art 

technology and innovations will be presented in a 

special lecture area.“ 

Dr. Alexa A. Becker, Managing Director, 

VOA 

Werner Mader, Managing Director, 

GSB International 

Exhibitors of ALUMINIUM at 


Although there will not take place 

an ALUMINIUM fair in Germany 

this year, our exhibitors will be on 

display: in Stuttgart at COMPOSI- 

TES EUROPE 2011. As most people already know, 

the most important German fair for composites 

and their applications, which is held every two 

years together with the ALUMINIUM show, will 

be held in Düsseldorf from 2012. It is probably 

less well known that some of the exhibitors, who 

are usually at home at ALUMINIUM, also use this 

platform for presenting their company in the 

uneven years. You can visit the following companies 

from 27-29 September 2011: 

Nabertherm GmbH; ERBO GmbH; Fraunhofer 

Institute for Manufacturing Technology and 

Advanced Materials IFAM; Reichenbacher 

Hamuel GmbH; RUWAC Industriesauger GmbH; 

Plasmatreat GmbH; 

MAKA Systems GmbH; Spanabhebende 

Präzisionswerkzeuge - SPPW GmbH 

Further information as well as a list of all 350 

exhibitors can be found at 

www.composites-europe.com. 

5

Exhibitor News 

6 





Pilot seminar “Successfully organizing foreign fairs” has 

started successfully 

The ALUMINIUM team in Düsseldorf held a seminar 

entitled “Successfully organizing foreign fairs” 

on 21 June 2011. Exhibitors of the ALUMINIUM 

trade fairs, as well as interested companies, could 

take part in the seminar free-of-charge. The content 

was aimed at companies who already take 

part in foreign fairs or are planning to do so, with 

the objective of assisting them when choosing 

the right foreign fair and easing participation in 

the fair. The lecturer, Thomas Starke, worked for 

over 15 years as a Product Manager and also as 

a Marketing and Sales Manager in renowned companies, 

including former start-up companies as 

well as worldwide corporations. During this time, 

he was responsible for participating in over 50 

national and international trade fairs. He is now 

passing on his experience in trade fair seminars 

and workshops. 

The seminar during the ALUMINIUM was well attended 

with 14 participants. The feedback was 

very positive and the request was made for furt- 

Lecturer Thomas Starke emphasized the particularities of participation in foreign fairs. 

14 company representatives from the aluminium industry 

took part in the pilot seminar. 

her seminars as well as for individual advice. The 

interest in global ALUMINIUM fairs was also considerable. 

The seminar was a complete success 

for the ALUMINIUM team and the participants. 

Further seminars of this kind are being planned 

as a series of events for exhibitors and potential 

exhibitors of the fair; further information about 

upcoming dates will be provided by us here. 

Increase the productivity of your extrusion press line 

with IBA-KAUTEC 

IBA-International Business Alliance (www.iba.co.in) 

was established in India in 1991 with the idea to 

provide European services to quality conscious 

clients in India. IBA’s core business is metal and 

especially Aluminium. Its engineers are associated 

with partners in Europe and this enables IBA to 

offer its services in Asia with European quality 

standards at an affordable Asian cost. Currently 

IBA handles extruded aluminum products (Bars 

and profiles), HSS and Tungsten Carbide Tools 

and extrusion press along with complete plant. 

To offer revamping, upgrading, and optimizing 

extrusion plants IBA has collaborated some European 

firms. IBA is a group of engineers, designers 

& marketing professionals working together in 

a joint collaboration to provide wide range of 

solutions. 

The highly experienced and trained engineers of 

IBA offer services 24 X 7 directly from Europe and 

India. Communication is never a problem with its 

multilingual staff. 

Currently IBA offers extrusion, of complete line 

annual service, spare parts. 

Meet IBA at ALUMINIUM INDIA 2011 at stand A25. 

Your contact: 

partner@iba.co.in, +91-11-41841624 

Further information: www.iba.co.in 

Alcoa’s aluminium façade as a dirt 

and smog destroyer 

Alcoa Architectural Products brings to 

the market under the trademark “Reynobond 

Reynolux with EcoClean” an 

Aluminium Façade Panel, which cleans itself and 

the surrounding air. It renders dirt and smog particles 

harmless with the aid of the sun and moisture 

and thus contributes towards self-cleaning 

the façade and purifying the surrounding air. 

Due to the ability to self-clean, the cleaning costs 

are reduced over the lifetime of the building. By 

comparison, there is a slight increase in production 

costs, which only has a minimal effect on the 

total price of the façade. Depending on the type 

of façade system, Alco presumes a price increase 

of between 1.5 and 5 per cent. In addition to the 

self-cleaning effect there is also the air purifying 

effect. 1,000 m² of “Reynobond Reynolux with 

EcoClean” eliminates the amount of smog that 

can be purified by around 80 trees. This is equivalent 

to the daily exhaust emissions of four cars. 

And this is how the new coating works: Under solation 

and even with low humidity, the light sensitive 

titanium dioxide coating, known as 

EcoClean, acts like a catalyst. Through the electrons 

released by the UV light, radicals are formed 

on the surface, which decompose organic substances, 

such as bird droppings, moss, exhaust 

emissions and smog particles. At the same time, a 

super hydrophilic and extremely smooth surface is 

produced. Even with minimal rainfall or dew the 

decomposed pollutants simply slide off the building 

leaving behind a clean façade. 

Source: www.aluinfo.de 

Meet Alcoa at ALUMINIUM 2012 in Hall 9, Stand 

9D30. 

Alcoa’s new aluminium façade cleans not only itself but 

also the surrounding air.





565 exhibitors have already reserved their space for 


A.t.i.e. Uno Informatica S.r.L., IT 

ABB AB Force Measurement, SE 

Aberle Automation GmbH Co. KG, 

DE 

Abu Dhabi Ports Company, UAE 

Achenbach Buschhütten GmbH, DE 

AD Chemicals B.V., NL 

ADEX B.V., NL 

Advanced Dynamics Corporation 

Ltd., CA 

AGVS Aluminium Werke GmbH, DE 

AHA EMMI d.o.o., SI 

AHC Oberflächentechnik GmbH, DE 

AIF Engineering Private Limited, IN 

Air Products, GB 

AJ Charnaud & Co. (Pty) Ltd., ZA 

AK ALÜMINYUM A.S., TR 

Aksan Metal A.S., TR 

Akzo Nobel Powder Coatings 

GmbH, DE 

ALAS ALUMINIUM SA, ES 

Albea GmbH, DE 

Alcan Engineered Products, CH 

ALCOA EUROPE Sarl, CH 

Alcomet AD, BG 

Aleastur, ES 

Aleris Switzerland GmbH, CH 

Alfot Technologies Co. Ltd, TW 

alimex Metallhandelsgesellschaft 

mbH, DE 

Aliplast NV, BE 

Alkalsan Alyuminyum Kaliplari, TR 

All.Co. S.p.A., IT 

ALMAX Mori srl, IT 

ALMESAN ALÜMINYUM, TR 

alpha metall GmbH, DE 

ALPSAN Aluminyum ve Plastik 

Profil San ve Tic A.S., TR 

Altec GmbH, DE 

Altek Europe Limited, GB 

Alto s.r.l. Aluminium Tooling, IT 

ALUCOL B.V., NL 

ALU Menziken Extrusion AG, CH 

ALU M.E.C. SpA, IT 

Alufinish GmbH & Co. KG, DE 

AluMag GmbH, DE 

ALUMERO Systematic Solutions 

GmbH, AT 

Alumil S.A., GR 

Aluminios Cortizo S.A., ES 

Aluminium Bahrain B.S.C. (ALBA), 

BH 

Aluminium Gieterij Oldenzaal BV, 

NL 

ALUMINIUM International 

Journal, DE 

ALUMINIUM INTERNATIONAL 

TODAY, GB 

Aluminium Laufen AG, CH 

Aluminium Lend GmbH, AT 

Aluminium Praxis, DE 

ALUMINIUM VALLEY SOCIETY, CA 

Aluminiumforum Hochrhein, DE 

Aluminiumtechnik Radebeul 

GmbH, DE 

Aluminiumwerk Unna AG, DE 

ALUPRO GmbH & Co. KG, DE 

Alupur Aluminiumvertrieb, DE 

ALUTEC Metallwaren GmbH & Co. 

KG, DE 

Alvarez Schaer, S.A., ES 

AMAG Austria Metall GmbH, AT 

AMARI Metall GmbH, DE 

AMCO Metall-Service GmbH, DE 

Analytical Reference Materials 

International, US ARP GmbH & 

Co.KG, DE 

ARMA Bauteile GmbH, DE 

Arslan Aluminiyum San. Tic. Ltd. 

Sti., TR 

ASAS Aluminiyum San. Tic. A.S., TR 

ASCONA GmbH, DE 

ASMP Aluminium Silicon Mill 

Products GmbH, CH Assan Alüminyum 

Sanayi ve Ticaret A.S., TR 

ASTAS Aluminyum San. Ve Tic. 

A.S., TR 

ATHERM, FR 

AUCOS GmbH, DE 

August Rüggeberg GmbH & Co. 

KG, PFERD-Werkzeuge, DE 

AUMUND Fördertechnik GmbH, DE 

AV. COTEVAL S.A., ES 

AVEMIS, FR 

AWW Aluminium-Werke Wutöschingen, 

DE 

AYKIM Metal Industry & Trade 

Co. Inc., TR 

AYL Import & Export AB, SE 

Bano Recycling SRL, IT 

Bancoclor S.L., ES 

BARANSAN ALUMINIUM PROFILE 

Co., TR 

BE Aluschmiede GmbH, DE 

BEFAY MAKINA SAN. TIC.LTD.STI., 

TR 

Beuth Verlag GmbH, DE 

Biegetechnik Steinrücken GbR, DE 

Biersack Maschinenbau GmbH, DE 

BLOOM Engineering (Europa) 

GmbH, DE 

BMS - Biegetechnik GmbH, DE 

Bodycote GmbH, DE 

Walter Böhler Steuerungen 

GmbH, AT 

Bralo Deutschland GmbH, DE 

BSN Thermprozesstechnik GmbH, 

DE 

Burak Aluminyum San. Ve Tic. Ltd. 

Sti., TR 

Buss AG, CH 

Bundesverband der deutschen 

Gießerei-Industrie (BDGuss), DE 

BUVO Castings BV, NL 

BWG Bergwerk- und Walzwerk- 

Maschinenbau GmbH, DE 

BZT Maschinenbau GmbH, DE 

C. Hilzinger- Thum GmbH & Co. 

KG, DE 

Calderys Deutschland GmbH & 

Co. OHG a 

member of IMERYS, DE 

Calsitherm GmbH, DE 

CANSAN AS, TR 

Carli Precimeter GmbH, DE 

CECOF, DE 

CELIKLER ALUMINYUM PLASTIK 

San. Tic. A.S., TR 

CEMAFON, DE 

CeramTec AG, DE 

Cestaro Fonderie SPA, IT 

C.F. Maier Leichtgusswerk GmbH 

& Co. KG, DE 

CHEMAL GmbH & Co.KG, DE 

Chemetall GmbH, DE 

Chiao Tai Aluminium Industry Co. 

Ltd., TW 

China Aluminium International 

Engineering 

Corporation Limited, CN 

Chongqing Runji Far East Alloy 

Co. Ltd., CN 

Ciclo Fapril, S.A., PT 

Clariant International AG, CH 

CNBM International Corp., CN 

COATCOIL BOYALI METALÜRETIM 

VE 

PAZARLAMA A.S., TR 

COEXAL GmbH, DE 

Cofi S.p.A., IT 

COILTEC Maschinenvertriebs 

GmbH, DE 

COMBILIFT Ltd., IE 

COMETAL Engineering S.p.A., IT 

COMEXALE S.A.R.L., FR 

COMPES S.P.A., IT 

CREMA ALLUMINIO S.R.L., IT 

CTI Systems S.A., LU 

Cuhadaroglu Metal San. Ve PAZ. 

A.S., TR 

Dantherm Filtration GmbH, DE 

Datapaq GmbH, DE 

DATRON AG, DE 

De Winter Engineering, NL 

DECORAL SYSTEM S.R.L., IT 

DEDACCIAI SRL, IT 

Dienes Werke GmbH & CO. KG, DE 

Diag Diesner GmbH + Co. KG, DE 

Dilers Ltd., LV 

Dima Simma S.r.l., IT 

DONAU CARBON SPA, IT 

Drache Umwelttechnik GmbH, DE 

Drahtwerk Elisental W. Erdmann 

GmbH & Co., DE 

DROSS Engineering sa, FR 

B 

C 

D 

DT Metal Geri Kazanim Tekn. San. 

ve Tic. A.S, TR 

Dubai Aluminium Company Ltd, AE 

DVS Media GmbH, DE 

Dynamic Concept, CA 

EAA - European Aluminium Association, 

BE 

EBNER Industrieofenbau GmbH, AT 

ECL SA, FR 

EiMa Maschinenbau GmbH, DE 

EISENMANN Anlagenbau GmbH 

& Co. KG, DE 

EISENMANN Druckguss GmbH, DE 

EKSTEK Alüminyum Profil Kaliplari 

San. ve Tic. Ltd. Sti.Aluminium 

Extrusion Die Tools, TR 

EKSTRA Muh.ve 

Mak.SanTic.Ltd.Sti., TR 

Eldan Recycling A/S, DK 

Elettromeccanica Viotto Srl, IT 

Elino Industrie-Ofenbau GmbH, DE 

Elkem GmbH, DE 

Elster GmbH, DE 

elumatec GmbH, DE 

Emirates Aluminium (EMAL), AE 

ELVAL S.A., GR 

EMMEBI srl, IT 

EMMEGI S.p.A., IT 

ENRC, CH 

ERBO GmbH, DE 

Erbslöh Aluminium GmbH, DE 

Erdoganlar Aluminyum A.S., TR 

Erdwich Zerkleinerungssysteme 

GmbH, DE 

EREDI SCABINI srl, IT 

Erhardt + Leimer GmbH, DE 

Ernst Reinhardt Industrieofenbau 

GmbH, DE 

Estral S.p.A., IT 

EUnited Metallurgy, DE 

Eural Gnutti S.P.A., IT 

Euramax Coated Products B.V., NL 

Eurometal SA, PL 

EUROPASS SRL, IT 

Everising Machine Co., TW 

EVERTZ Hydrotechnik GmbH & 

Co. KG, DE 

EXTRAL Sp.z o.o., PL 

Extrusion de Sax S.L., ES 

Extrusiones de Toledo S.A., ES 

extrutec GmbH, DE 

FAR SHEN ELECTRIC CO., LTD, TW 

FATA HUNTERDivision of FATA 

S.p.A., IT 

FBB engineering GmbH, DE 

Fehr Lagerlogistik AG, CH 

Feinguss Blank GmbH, DE 

FENIS ALUMINIUM A.S., TR 

Fill Gesellschaft m.b.H., AT 

Final S.A., PL 

Fives North American 

Combustion, Inc., US 

Fizeta s.r.l., IT 

FKM Metallkomponenten GmbH, DE 

FMA Feinmechanik und Elektronik 

AG, LI 

FONDERIA ALFREDO TOGNO S.r.L., IT 

Fonderia Maspero SRL, IT 

FORGIALLUMINIO 3 s.r.l., IT 

Forging Group Monale SRL, IT 

Formal Alüminyum San. ve Tic 

A.S., TR 

FOSHAN SCIEN ALUMINIUM 

CO.,LTD, CN 

Foshan Younger Furnance Industry 

Co. Ltd., CN 

Foster Chemicals GmbH, DE 

FOUNDRY ECOCER Srl, IT 

FRIGGI CUTTING SOLUTION s.r.l, IT 

Fritz Schiess AG Feinschnitt- 

Stanzwerk, CH 

FU JIAN XIANG XIN, CN 

FUNDIGEX, ES 

Furukawa-Sky Aluminium Corp., JP 

Fuzhou Metal-New High- 

Temp.Tech.Co., Ltd., CN 

GABRIJEL AS d.o.o., SI 

Garfield Aluminium B.V., NL 

Gartner Extrusion GmbH, DE 

gatv mbH Gesellschaft für 

aero- und thermodynamische 

Verfahrenstechnik, DE 

E 

F 

G 

Gautschi Engineering GmbH, CH 

GDA - Gesamtverband der Aluminiumindustrie 

e.V., DE 

Gebrüder Lohmann GmbH, DE 

Gebrüder Unglaub Metallwarenfabrik, 

DE 

General Insulation Europe Ltd, DE 

Gerhardi Alutechnik GmbH & Co. 

KG, DE 

GERKEN S.A., BE 

GHI HORNOS INDUSTRIALES, S.L., 

ES 

GiA Clecim Press, ES 

GLAMA Maschinenbau GmbH, DE 

GLEICH Aluminiumwerk GmbH & 

Co KG, DE 

Global C GmbH, DE 

Goodcomer Co., Ltd, TW 

GOM mbH, DE 

Gouda Feuerfest GmbH, DE 

GRAF TECHNIK GmbH 

Reinigungssysteme, DE 

Gramm Technik GmbH, DE 

Granco Clark Inc., US 

Grohmann Aluworks GmbH & Co. 

KG, DE 

Grupa Kety SA Extruded Product 

Division, PL 

GSB International - Gütegemeinschaft 

für die Stückbeschichtung 

von Bauteilen e.V., DE 

Guang Ya Aluminium Industries 

Co., Ltd., CN 

Gujarat Foils Ltd., IN 

Gulf Extrusions Co. L.L.C., AE 

Gutmann AG, DE 

H + H Herrmann + Hieber GmbH, 

DE 

H.E. Phipps Co. Inc.(HEPCO), US 

HAI Hammerer Aluminium Industries 

GmbH, AT 

HAL Aluminiumguss Leipzig 

GmbH, DE 

HAOMEI ALUMINIUM Co., Ltd, HK 

Harbin Dongsheng Metal Co., 

Ltd., CN 

Has Alüminyum A.S., TR 

HD Wahl GmbH, DE 

Hebei Sitong New Metal Material 

Co., Ltd, CN 

HEICHE Oberflächentechnik 

GmbH, DE 

HEINRICH GEORG GmbH, DE 

Heinrich Kreeb GmbH & Co. 

Schleif- und Polierwerkzeugfabrik, 

DE 

Heinz Soyer Bolzenschweißtechnik 

GmbH, DE 

Henan Jiayuan Aluminum 

Industry Co.,Ltd., CN 

HENAN XINTAI ALUMINIUM 

INDUSTRY CO.,LTD, CN 

Hencon B.V., NL 

Henkel AG & Co. KGaA, DE 

HERPERTZ – PRÄZISION B. Herpertz 

GmbH + Co. KG, DE 

Hirschvogel Umformtechnik 

GmbH, DE 

Hittech Gieterij Nunspeet BV, NL 

HK Entgrattechnik GmbH, DE 

HKO Heat Protection Group, DE 

HMR Group AS, NO 

HMT Höfer Metall Technik GmbH 

& Co. KG, DE 

HOESCH METALLURGIE GmbH, DE 

Hofmann Wärmetechnik GmbH, AT 

Holland Aluminium Pavilion, NL 

Hotwork Combustion Technology 

Ltd, GB 

Hubtex Maschinenbau GmbH & 

Co. KG., DE 

Hunan Suntown Technology 

Group Co.,Ltd, CN 

Hwan Chee Metal Co.,Ltd, TW 

Hydratech AB, SE 

II.A.S. 

Induktions-Anlagen + 

Service GmbH & Co. KG, DE 

Imbach & CIE AG, CH 

IMM Machinery Inc., US 

Impexmetal S.A., PL 

IMPOL d.o.o., SI 

IMS Deltamatic S.p.A., IT 

IMS Messsysteme GmbH, DE 

Your contacts 

Facts & Figures 


9 th World Trade Fair & Conference 

9-11 October 2012, Messe Düsseldorf, Germany 

Halls 9-14, Opening hours: 9am-6pm 

Expected exhibitors: 

950 from more than 40 nations 

Expected visitors: 

25,000 from around 100 nations 

Exhibition space: 75,000 sqm 



+49 (0)211 90191 183 

Markus.Jessberger@reedexpo.de 

Michael Köhler 

Project Manager 

+49 (0)211 90191 225 

Michael.Koehler@reedexpo.de 

Jessica Kristian 

Senior Sales Manager 

+49 (0)211 90191 232 

Jessica.Kristian@reedexpo.de 

Hilke Dahinten 

Sales Manager 

+49 (0)211 90191 104 

Hilke.Dahinten@reedexpo.de 

Lisa Laakmann 

Project Assistant 

+49 (0)211 90191 202 

Lisa.Laakmann@reedexpo.de 

Eva-Maria Oymans 

Visitor Coordinator 

+49 (0)211 90191 330 

EvaMaria.Oymans@reedexpo.de 

Specials: 

ALUMINIUM 2012 Conference 

EUROPEAN ALUMINIUM AWARD 2012 

7

INASA FOIL S.A:, ES 

Mechatherm International Ltd., GB PSI Group Company, DE 

Erich Sydow GmbH & Co. KG, DE 

Inductotherm Heating & Welding MECU-Metallhalbzeug GmbH & Pyrotek Inc., US 

Symetal S.A., GR 

Technologies Ltd An 

Inductotherm Group Company, GB 

INDUMASCH Eberhard Sting 

GmbH & Co. KG, DE Industries 

3R inc., CA 

Innoval Technology Ltd, GB 

Innovatherm Prof. Dr. Leisenberg 

GmbH + Co. KG, DE 

INOX Schleiftechnik GmbH + Co 

KG, DE 

INSERTEC Ingeniería y ServiciosTécnicos, 

S.A., ES 

Interfer Aluminium GMBH, DE 

Internasjonale Messetjenester, NO 

IGP Pulvertechnik AG, CH 

Isel Germany GmbH, DE 

ISRA PARSYTEC GmbH, DE 

IST GmbH Industrieofen + Stranggieß 

-Technik, DE ITALFERRO Spa 

Aluminium, Iron and Steel 

Products, IT 

ITALMAC S.R.L., IT 

Italtecno SRL, IT 

ITC-International Trading 

Co.Sp.zo.o, PL 

JJ.R. 

Schneider Co., Inc., US 

JASPER GmbH Industrieofenbau, DE 

Jein Yeh Ind. Co.,Ltd., TW 

JIANG YIN GIANSUN MOULD CO., 

Co. KG, DE 

MES MAKINA ELEKTRIK KIMYA 

SAN ASMES Aluminium, TR 

MESAN METAL Alüminyum San. 

ve TIC. A.S., TR 

Metachem Metall- u. Oberflächenchemie 

Sperzel GmbH, DE 

Metall Dittrich Heinz Dittrich 

GmbH & Co. KG, DE 

Metallgießerei Franz Dussler 

GmbH, DE 

Metallpresswerk München GmbH, 

DE 

Metalscan Limited, GB 

Metawell GmbH metal sandwich 

technology, DE Metlsaw Systems 

Inc., US 

Metalquex, ES 

METRA S.p.A., IT 

MET-TECH GmbH, DE 

Mextra Eng. Extrativa de Metais 

Ltda., BR 

MICRO-EPSILON Messtechnik, DE 

MICRO TECHNICA Technologies 

GmbH, DE 

Mid-Mountain Materials Inc., US 

MIFA Aluminium bv Aluminium 

Precision Extrusion, NL 

Miranda & Irmao, LDA, PT 

QQatar 

Aluminum Limited (Q.S.C), QA 

Qualiteam International Maastricht 

B.V., NL 

Quartz Business Media Ltd, GB 

RRath 

AG, AT 

RBB Aluminium-Profiltechnik AG, 

DE 

Refratechnik Steel GmbH, DE 

Reimann GmbH, DE 

REISCH Maschinenbau GmbH, AT 

Rena Castings B.V., NL 

Rex Materials Group, US 

RHI AG, AT 

Riedhammer GmbH, DE 

RIFTEC GmbH, DE 

Rio Tinto Alcan Inc., CA 

RMG Metallfachhandel GmbH, DE 

Robert Röntgen GmbH & Co, DE 

Rodabell S.A., ES 

Ronmas BV, NL 

Roto Frank Austria GmbH, DE 

RUF GmbH & Co. KG Maschinenbau, 

DE 

RUWAC Industriesauger GmbH, DE 

SS+C 

Extrusion Tooling Solutions 

GmbH; DE 

Schlager Industrieofenbau GmbH, 

TT.T. 

Tomorrow Technology , IT 

TALLERES ZB, S.A. , ES 

TALUM d.d. Kidricevo, SL 

Taishan Golden Gain Aluminium 

Products, Ltd., CN 

TECALEX , ES 

TECALUM SL , ES 

Techmo Car S.p.A. , IT 

TEKNA Deutschland GmbH , DE 

TEKNIK ALÜMINYUM SAN. A.S., TR 

Teknik Profil Aluminyum San. Dis 

Tic. A.S. , TR 

TEKSAN MAKINA VE Yapi Elemanlari 

Imalat San. Ve Tic. Ltd. Std, TR 

THERMCONCEPT Dr. Fischer 


Thermo Fisher Scientific Messtechnik 

Gmbh, DE 

Thermserve Ltd, GB 

Thoman Biegemaschinen GbR, DE 

Thoni-Alutec sp z o.o. , PL 

Thyssen Krupp Materials International 

GmbH, DE Trafilerie Alluminio 

Alexia S.P.A. , IT 

Trasmetal SPA, IT 

TRIMET ALUMINIUM AG , DE 

TURLA s.r.l. , IT 

UUC 

RUSAL, RU 

Ulusan Aluminium Technology, TR 

LTD, CN 

Miralu Deutschland GmbH, DE DE 

Umformtechnik Radebeul GmbH, 

Jiangsu Asia Pacific Light Alloy 

Technology Co, Ltd., CN 

Jindal Aluminium Ltd., IN 

Josef Fröhling GmbH & Co. KG 

Walzwerksmaschinenbau, DE 

JUTEC Hitzeschutz GmbH, DE 

MKB Metallguss GmbH, DE 

MN Coil Servicecenter GmbH, DE 

Mössner GmbH + Co. KG, DE 

Modern Media Communications 

Ltd, GB 

Monti Engineering Srl, IT 

Saint-Gobain Industrie Keramik, DE 

SALMEC Ingeniera S.A., ES 

SAPA AB, SE 

SAT Surface Aluminium Technologies 

S.p.A., IT 

Schelling Anlagenbau GmbH, AT 

DE 

UNICUT Wahl GmbH , DE 

Unifour B.V. , NL 

Unterschütz Sondermaschinenbau 

GmbH , DE 

Urja Products Private Ltd , IN 

Jutesan Aluminyum Profil Imalat 

San. Ve Tic. A.S., TR 

KKA 

METALURJI SANAYIDIS TIC. 

LTD. STI., TR 

Kaiser Aluminium -Umformtechnik 

GmbH, DE 

Kalmbach GmbH, DE 

KAMPF Schneid- und Wickeltechnik 


Karl Dungs GmbH & Co. KG, DE 

Karl Kaldenberg GmbH & Co. KG 

Metallgießerei, DE Kastens und 

Knauer GmbH & Co, DE 

KASTO Maschinenbau GmbH & 

Co KG, DE 

Keihin Seimitsu Kogyo Co. Ltd., JP 

Kempe International, AU 

Kemper-Kontakt Gert Kemper 

GmbH, DE 

KERAMAB N.V., BE 

Kersten Europe GmbH, DE 

Kind & Co. KG, DE 

Klöckner & Co SE, DE 

Mor Alüminyum Metalurji Mak. 

Ins. San. Ve Tic. Ltd. Sti., TR 

MQP Ltd., GB 

Munk GmbH, DE 

Must Metal Corp, CN 

NNabertherm 

GmbH, DE 

NABU Oberflächentechnik GmbH, 

DE 

Navarra-Extrusao de Aluminio, 

S.A., PT 

Nedal Aluminium B.V., NL 

Neuman Aluminium Fließpresswerk 

GmbH, AT 

NIE-MET Manfred J.C. Niemann 

Zentrale KG, DE NISSAL Aluminium 

Industry, RS 

NITREX METAL INC., CA 

Norsk Hydro ASA, NO 

Novelis, CH 

NUR Alüminyum Tic. Ltd. Sti., TR 

OOEA 

- Organisation of European 

Aluminium 

Schmolz + Bickenbach 

Distributions GmbH, DE 

Schött Druckguss GmbH, DE 

SCHÜCO International KG, DE 

Schwartz GmbH, DE 

SECO/WARWICK S.A., PL 

Selee Corporation, US 

SELEMA S.r.l., IT 

SEPAL S.p.A., IT 

Sermas Industrie, FR 

SGM Gantry S.p.A., IT 

Shanghai Electric Import and Export 

Co. Ltd, CN Shanghai Jieru 

Heavy Industrie Equipment Co., 

Ltd, CN 

Shanghai Zhengyu Special Alloys 

Co., Ltd., CN 

Shenzhen Litong United Imp & 

Exp Co, Ltd, CN 

Siemens VAI Metals Technologies, 

GB 

Siempelkamp GmbH & Co. KG, DE 

SILCA GmbH, DE 

Sino-Pacific Source Enterprise Co. 

VVAPORMATT 

Group Ltd , GB 

Vecoplan AG, DE 

VERECO SRL , IT 

VerMoTec GmbH, DE 

Vesuvius Group sa/nv , BE 

vhf camfacture AG , DE 

VIBA s.r.l. , IT 

VIG MAKINA SAN.TIC.LTD. , TR 

Vimetco Extrusion SRL , RO 

VIMETCO TRADING S.R.L., RO 

VIRO Schmiedeteile GmbH , DE 

VOA – Verband für die Oberflächenveredelung 

e.V., DE 

VOLLERT Anlagenbau GmbH + Co. 

KG, DE 

Vostermans Alu Foundries BV, NL 

WWagstaff 

Inc, US 

Weima Maschinenbau GmbH , DE 

Weinmann Aach AG, DE 

Welser Profile Deutschland 

GmbH, DE 

Werth Messtechnik GmbH , DE 

Wickeder Westfalenstahl GmbH, DE 

KMF Kärntner Maschinenfabriken Refiners and Remelters, DE Ltd., TW 

WIKUS-Sägenfabrik GmbH & Co 

GmbH, AT 

Okyanus Aluminyum San. Tic. SISO GmbH, DE 

KG, DE 

Kohnle GmbH Hartmetall-Werkzeug-Fabrik, 

DE 

KORFF AG, CH 

Korumaz Kardesler Alüminyum 

Sanayi A.S., TR 

KOVINAR d.o.o., SI 

Kullen GmbH & Co KG, DE 

Kunshan Giant Light Metal Technology 

Co., Ltd, CN Kurtz GmbH, DE 

LLaminazione 

Sottile S.p.a., IT 

LB Aluminium Berhad, MY 

Lechler GmbH, DE 

LEIBER Group GmbH & Co. KG 

Aluminium Umform- und Bearbeitungstechnik, 

DE 

LOI Thermprocess GmbH, DE 

London Scandinavian Metallurgical, 

GB 

MMack 

Alu-Systeme GmbH, DE 

MADAR Coil Coating, SY 

MAKA Systems GmbH, DE 

Mäkelä Alu Oy, FI 

Marx GmbH & Co.KG, DE 

MASTEL Aluminium Halbzeuge 

GmbH, DE 

MAW Mansfelder Aluminiumwerk 

GmbH, DE 

MB-Portatec GmbH, DE 

A.S., TR 

OMAV S.P.A., IT 

Omya (Schweiz) AG, CH 

OPTALEX Ltd., IE 

Osborn International GmbH, DE 

OTTO JUNKER GmbH, DE 

Outotec GmbH, DE 

PP.M.S. 

Metal Profil Alüminyum 


Pamukkale Aluminyum San. Ticaret 

A.S., TR 

Pankl Schmiedetechnik GmbH & 

Co. KG, AT 

PD Roding GmbH, DE 

Phoenix International Spa, IT 

Piesslinger GmbH, AT 

plating electronic GmbH, DE 

POLIGRAT GmbH, DE 

Polychromal BV, NL 

PRESEZZI Extrusion Spa., IT 

PRESS METAL BERHAD, MY 

Pressta Eisele GmbH, DE 

Prétat SA, CH 

Profeks Aluminyum Profil Kaliplari 

Ltd., TR 

Profilati Alluminio S.r.l., IT 

Profilbiegetechnik AG, CH 

Profilglass s.p.a., IT 

promeos GmbH, DE 

SISTEM ALUMINYUM 

San.Ve.Tic.AS, TR 

Sistem Metal Yapi ve Reklam 

Malzemeleri 


SLM CO., LTD, KR 

SMS Siemag AG, DE 

SOFITRAL S.A. , FR 

SOLIOS Environnement , FR 

Sopena Metales, S.L. , ES 

Southeast Aluminum co., ltd , CN 

Spanabhebende Präzisionswerkzeuge 

GmbH, DE 

Spraying Systems Deutschland 

GmbH , DE 

SRS Amsterdam BV , NL 

Standard-Metallwerke GmbH, DE 

STAS, Inc , CA 

Steinert Elektromagnetbau 

GmbH, DE 

Stellar Materials International, NL 

STEULER-KCH GmbH, DE 

STEVTISS S.A. , FR 

STOZ GmbH , DE 

STROJMETAL KAMENICE, s.r.o., CZ 

SUBLITEX-MIROGLIO TEXTILE 

S.r.l., IT 

Sun Ark GmbH, DE 

SurTec Deutschland GmbH, DE 

Suzhou Lopsking Aluminium Co., 

Wilhelm Gronbach GmbH, DE 

Williamson Corp , US 

WIOTEC Wilmes Oberflächentechnik, 

DE 

Wirtschaftsverband Großhandel 

Metallhalbzeug e.V., WGM 

Pavillon, DE 

Wissner Gesellschaft für Maschinenbau 

GmbH, DE 

XXingfa 

Aluminium Co., Ltd. , CN 

YYe 

Fong Aluminium Industrial 

Ltd., TW 

Yilmaz PVC ve Alüminyum Isl. 

Mak. San. Tic. Ltd. Sti., TR 

Yuan Sheng Aluminium 

MFG.Corp. , TW 

ZZahit 

Alüminyum ve. Plastik San. 

Tic. Ltd. Sti.., TR 

Zaklad Uslugowy „ROSA“ Sp. z 

o.o. , PL 

Zenergy Power GmbH , DE 

ZERUST GmbH, DE 

Zhengzhou Haomei Industrial Co., 

Ltd., CN 

ZIRCAR Ceramics, Inc. , US 

Zmag America Ltd., USA 

ZOP Co. Ltd. Forging Plant , PL 

ZPF Foundry4, DE 

MCB Deutschland GmbH, DE Promat GmbH Technische Wär- LTD , CN 

ZPF Services, DE 

ME.C.AL SpA, IT 

medämmung, DE 

SWG GmbH, DE 

ZPF therm Maschinenbau GmbH, 

Mecfor Inc., CA 

PSI Metals Non Ferrous GmbH Swiss Alu Trading AG, CH 

DE 

8 

9th World Trade Fair & Conference 



As at: 30 August 2011, subject to change. 

ALUMINIUM Global 

Reed Exhibitions offers the aluminium industry 

attractive business platform in dynamic aluminium 

markets: 


10 – 12 November 2011 

Bombay Exhibition Centre 

Mumbai, India 

www.aluminium-india.com 

ALUMINIUM BRAZIL 2012 

24 – 26 April 2012 

Centro de Exposições Imigrantes 

Sao Paulo, Brazil 

www.aluminium-brazil.com 

ALUMINIUM CHINA 2012 

6 – 8 June 2012 

SNIEC - Shanghai New 

International Expo Centre 

Shanghai, China 

www.aluminiumchina.com 

ALUMINIUM MIDDLE EAST 2013 

23 – 25 April 2013 

DICEC - Dubai International 

Convention & Exhibition Centre 

Dubai, United Arab Emirates 

www.aluminium-middleeast.com 

Further information on pages 3 and 4 or at 

www.aluminium-global.com. 

Imprint 

Editor: 

Reed Exhibitions Deutschland GmbH 

Völklinger Strasse 4 

D-40219 Düsseldorf 

GERMANY 

P.O. Box: 

Postfach 10 16 42 

D-40007 Düsseldorf 

GERMANY 

+49 (0) 211 90 191 - 0 

+49 (0) 211 90 191 - 195 

info@aluminium-messe.com 


CEO / CFO / MD: 

Hans-Joachim Erbel, 

Matthias Templin, 

Michael Freter 

Responsible for the content: 



Völklinger Str. 4 

40219 Düsseldorf

ALU NL_Aug11_engl NEU:Layout 1 - ALUMINIUM 2012

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?