p17eus5n7g1vqn15ad31m19bp1p894.pdf

NETWORk INFRASTRuCTuRE SOluTIONS
wireleSS acceSS Point encloSureS
Since 1999, Oberon has provided a complete line of products to secure wired and wireless networking components. Oberon enclosures and antenna
products are used where the RF coverage, infrastructure security, environmental robustness, code compliance, and aesthetics are paramount in the
network design and implementation. Solutions include suspended ceiling tile-like enclosures, surface mount and recessed enclosures, and outdoor
enclosures. Oberon’s products have been tested with most of the industry-leading wireless networking vendor products.
bEFORE
AFTER
Oberon’s ceiling enclosures and antenna products secure, simplify, and improve wireless LAN infrastructures. They preserve the integrity and safety of
the ceiling system and air-handling space by effectively moving the wireless equipment into a conveniently accessed ceiling location. The enclosures,
resembling a standard ceiling tile, keep the wireless equipment secure in an open office space. Wireless access points or antennas are mounted in the
door, thereby optimizing in-room coverage. Moves, adds, and changes are easy. Oberon designs and manufactures wireless locking enclosures for
indoor and outdoor uses, including wall-mounted, cut-away hard ceiling, and NEMA 4 enclosures.
2’ X 2’ uNIVERSAl WIRElESS ACCESS POINT
CEIlING ENClOSuRE
Aesthetic, plenum-rated suspended ceiling tile enclosure designed for
access points with detachable antennas.
wireleSS acceSS Point encloSureS
FEATuRES:
• Back box is 12.5” x 12.5” x 4.5” deep
• UL-listed, designed to meet NEC300-22 and 300-23 for installations in the air
handling space, OSHPD approved OPA #1638
,• Accomodates up to 7 antennas using the bulkhead connector kit for
dipole antennas (Oberon part #35-BULKHD-KIT) or Oberon 34-ZDUAL or
34-DMDUAL antennas; Hinged locking door, keyed alike
• Optional universal mounting plate kit accommodates most manufacturers’
access points (Oberon part #38-1052-MNT-KIT)
• Construction: white, powder-coated steel
JENNE PART NuMbER:
1052-00 2’ x 2’ Universal Wireless Access Point Ceiling Enclosure
ObERON SOluTIONS
bEFORE
AFTER
1052-00
2’ X 2’ uNIVERSAl WIRElESS ACCESS POINT CEIlING ENClOSuRE WITh RF TRANSPARENT
DOME
Aesthetic, plenum-rated suspended ceiling tile enclosure designed for
access points from most manufacturers with non-detachable antennas.
FEATuRES:
• Back box is 18” x 18” x 2.6” deep, dome is 14” sq. x 4” deep
• UL-listed, designed to meet NEC300-22 and 300-23 for installations in the air
handling space, OSHPD approved OPA #1638
,• ABS dome is virtually transparent to RF signals
• Hinged locking door, keyed alike
• Construction: white, powder-coated steel enclosure, UL-94-5VA classified,
impact-resistant white ABS dome
JENNE PART NuMbER:
1059-00
1059-00 2’ x 2’ Universal Wireless Access Point Ceiling Enclosure with RF
Transparent Dome
������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������
178
www.jenne.com • 800-422-6191
178