p17eus5n7g1vqn15ad31m19bp1p894.pdf

NETWORk INFRASTRuCTuRE SOluTIONS
FS108P
ProSafe® 8-port 10/100 Switch with 4-port Power over Ethernet
The ProSafe FS108P provides power and data from a single point, using Power over
Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used
for any 10/100 Mbps link and four of these ports can supply industry-standard
IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af
end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE
devices are disconnected. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type
using Auto Uplink
• Supply power to wireless access points and surveillance cameras over Cat-5 cabling
• IEEE 802.3af power on up to 4 ports
• 8 10/100 Mbps Ports with AutoUplink
JENNE PART NuMbER DESCRIPTION
FS108PNA 8 auto speed-sensing 10/100 RJ-45 ports
FS108P
ProSafe® 16-port 10/100 Desktop Switch with 8-port PoE
The ProSafe FS116P provides power and data from a single point, using Power over
Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used
for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power.
Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging
proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable,
the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink
• Supply power to wireless access points and surveillance cameras over Cat-5 cabling
• IEEE 802.3af power on up to 8 ports
• Powers up to 8 Access points, 8 VoIP phones, 8 IP-based Surveillance cameras
JENNE PART NuMbER DESCRIPTION
FS116PNA 16 auto speed-sensing 10/100 Mbps RJ-45 ports
AFM735
ProSafe® 100Base-FX SFP LC GBIC
• Adds Fast Ethernet fiber connectivity to
fully Managed Switches
• Fits into standard SFP slots
• Drives Fast Ethernet up to 2 km distances
with multimode fiber
• Fast Ethernet multimode fiber connectivity
(IEEE® 802.3-2002)
• LC duplex connector
• Fits into standard SFP interfaces of
fully Managed Switches
• FSM726, GSM72xx, GSM72xxPS, GSM73xxS,
GSM7328FS
• Drives Fast Ethernet up to 2 km distances
with legacy 62.5/125μm OM1 multimode
fiber cables
• Drives Fast Ethernet up to 2 km distances
with 50/125μm laser-optimized OM3
multimode fiber cables
• 5-year warranty
JENNE PART NuMbER DESCRIPTION
AFM735-10000S 100Base-FX SFP LC GBIC
AFM735-10000S
ProSafe unManaged SwitcheS
ProSafe Switch ModuleS
AGM731F
ProSafe® 100Base-FX SFP LC GBIC
• Gigabit Ethernet “short-reach” fiber
connectivity
• LC duplex connector
• Meets SFP GBIC standard for use with
any SFP GBIC compliant slo
• Fits into SFP interfaces of JGS524F, all
Fully Managed Switches, and all
Smart Switches
• Drives Gigabit Ethernet up to 550 m
distances with 50/125ìm laser-optimized
OM3 multimode fiber cables
• Drives Gigabit Ethernet up to 275 m
distances with 62.5/125ìm OM1
multimode fiber cables
• 5-year warranty
AGM731F
AGM734
ProSafe® 1000Base-T SFP RJ45 GBIC
• Adds Gigabit Ethernet copper connectivity
to XSM7224S and GSM7328FS
• Fits into standard SFP slots
• Drives Gigabit Ethernet up to 100m
distances with CAT5E/CAT6
• 1000Base-T Gigabit Ethernet copper
connectivity
• RJ45 connector
• Fits into the SFP+ interfaces of XSM7224S
• Fits into the SFP interfaces of GSM7328FS
• Drives Gigabit Ethernet up to 100m
distances with CAT5E/CAT6 cables
• 5-year warranty
FS108P
FS116P
JENNE PART NuMbER DESCRIPTION
AGM734-10000S 1000Base-T SFP RJ45 GBIC
AGM734-10000S
������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������
164
www.jenne.com • 800-422-6191