p17eus5n7g1vqn15ad31m19bp1p894.pdf

InstallatIon supplIes and tools
dsl Micro-Filter, In-line
single-line
• In-line low pass micro-filter • Single line filter
• A plastic-cased PCB assembly with a four-conductor jack
on one end and a four-conductor plug on the other end
• Application: filters out erratic impedance from single-line
(pins 3 and 4) telephone equipment that
would interfere with DSL transmissions
Jenne Part numBer:
900lCC-50
900LCC-50
dsl Micro-Filter, In-line adapter,
Filters line 1
• In-line low pass micro-filter • Line 1 filter, line 2 pass-thru
• A plastic cased PCB assembly with a four-conductor jack
on one end and a four-conductor plug on the other end
• Application: filters out erratic impedance from Line 1
(pins 3 and 4) of telephone equipment that would interfere
with DSL transmissions
• Line 2 (pins 2 and 5) are passed-thru to connect xDSL
compatible devices
• Includes second jack that is unfiltered for
connecting DSL devices
Jenne Part numBer:
900LCCS-50
900LCCS-50
adsl Micro-Filter, Flush Mount
Provides both an unfiltered DSL jack for DSL connection and a
filtered jack for one or two lines of voice device communications
in a flush mount design.
• Auxiliary DSL jack
• Screw terminals
Jenne Part numBer:
625lCC2-52 (1 line filtered-ivory)
625lCC2-85 (1 line filtered-white)
625lCC2-2F-52 (2 lines filtered-ivory)
625lCC2-2F-85 (2 lines filtered-white)
625LCC2-2F-52
dsl line conditioneRs®
dsl Micro-Filter, In-line two-line
• In-line low pass micro-filter • Two line filter
• A plastic-cased PCB assembly with a four-conductor
jack on one end and a four-conductor plug on the other end
• Application: filters out erratic impedance from two-line
(pins 2, 3, 4, 5) telephone equipment that would interfere with
DSL transmissions (Line 1 - pins 3 and 4, Line 2 - pins 2 and 5)
Jenne Part numBer:
900lCC-2F-50
DSLTEST-1
900LCC-2F-50
dsl Micro-Filter, In-line
two-line adapter, Filters line 1 and 2
• In-line low pass micro-filter
• Two line filter (L1 and L2 filtered)
• A plastic-cased PCB assembly with a four-conductor jack
on one end and a four-conductor plug on the other end
• Application: Filters out erratic impedance from two-line
(pins 2, 3, 4, 5) telephone equipment that would interfere with
DSL transmissions (Line 1 - pins 3 and 4, Line 2 - pins 2 and 5)
• Includes second jack that is unfiltered for connecting
DSL devices
Jenne Part numBer:
900LCCS-2F-50
900LCCS-2F-50
dsl test units
• Allows for an active DSL line to be tested for POTS (voice)
verification without interfering with the DSL service connection
• Hand held device • RJ-14 modular jack for input connection
• Input can be made with double-ended modular cord or with a
universal test cord equipped with a modular plug on one end and
test clips on the other end as used with a typical butt set
• The connection for testing is provided with two RJ-14
modular jacks
• Testing can also be made through the test access point
terminals for use with alligator clips
Jenne Part numBer:
dsltest-1 No test cord included
dsltestKIt1 with 1-foot test cord included
dsltestKIt3 with 3-foot test cord included
dsltestKIt7 with 7-foot test cord included
������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������
www.jenne.com • 800-422-6191
������������������������������������������������������������������������������������������������
502