27.12.2012 Views

p17eus5n7g1vqn15ad31m19bp1p894.pdf

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

InstallatIon supplIes and tools<br />

amplifier and splitter<br />

Enjoy better signal quality by boosting incoming video with an<br />

amplifier and splitter. Generally an amp is recommended if splitting<br />

the signal six or more ways. Attach the incoming signal into the<br />

amplifier, connect the power, and connect the output of the<br />

amplifier to the input of the splitter to distribute boosted<br />

signal throughout the home.<br />

saM-RFBa11<br />

1 x 1 Bi-directional RF amplifier module<br />

• 3”H x 6.5”W x 2”D<br />

• 1 x 1 Bi-directional RF amplifier, 15dB,<br />

power passing (forward only), SCTE compliant<br />

• Includes DC power adapter<br />

Jenne Part numBer:<br />

saM-RFBa11<br />

amplifier splitters<br />

Provide better signal quality at all the home’s TVs and save space<br />

in the enclosure with amplified splitters. Plug the incoming<br />

signals for the CATV, satellite, or antenna into the inputs.<br />

Auxiliary ports 2 and 3 can also be used for more than one of<br />

these inputs or to pass modulated signal from DVD/VCRs or<br />

security cameras. Plug the power adapter in and you’re ready<br />

to start enjoying better video quality throughout the home.<br />

saM-RFBa18<br />

1 x 8 Bi-directional amplified video splitter<br />

• 3.5”H x 6.5”W x 3”D<br />

• 1GHz, SCTE compliant<br />

• Includes DC power adapter<br />

Jenne Part numBer:<br />

saM-RFBa18<br />

saM-RFBa38<br />

3 x 8 Bi-directional amplified video splitter<br />

• 3.5”H x 6.5”W x 3”D<br />

• 1GHz, SCTE compliant,<br />

• Includes DC power adapter<br />

Jenne Part numBer:<br />

saM-RFBa38<br />

satellite 3 X 4 Multi-switch Module<br />

Distribute satellite and off-air antenna signal (or other input)<br />

to a maximum of four receivers with this DirectTV® approved<br />

satellite multi-switch.<br />

Take the two feeds from the satellite and connect them to the<br />

correct inputs on the multi-switch. Then connect the signal from<br />

the off-air antenna (if used). After that, just connect the outputs<br />

to the receivers located throughout the home.<br />

• 3 x 4 multi-switch, satellite, DirectTV® approved<br />

saM-Ms34<br />

Satellite 3 x 4 multi-switch module<br />

Jenne Part numBer:<br />

saM-Ms34<br />

soho access modules: Video<br />

SAM-RFBA11<br />

SAM-RFBA38<br />

SAM-MS34<br />

������������������������������������������������������������������������������������������������<br />

��������������������������������������������������������������������������������������������<br />

www.jenne.com • 800-422-6191<br />

������������������������������������������������������������������������������������������������<br />

506<br />

SAM-RF6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!