The new processing system from Kathrein
The new processing system from Kathrein
The new processing system from Kathrein
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Block diagram of amplifier module<br />
Refer to the <strong>Kathrein</strong> brochure,<br />
“UFO ® DIGIplus – the <strong>new</strong> signal<br />
<strong>processing</strong> <strong>system</strong>,” for more<br />
information and technical data.<br />
14<br />
FM range amplifier UFO 710<br />
<strong>The</strong> FM amplifier UFO 710 is used for broadband reception of FM range.<br />
Six individually tuneable traps for attenuating strong FM transmitters are integrated<br />
in the module.<br />
With the FM 4-way converter UFO 711, up<br />
to four FM programmes can be selectively<br />
converted.<br />
<strong>The</strong> four-way module has one input and one<br />
output. <strong>The</strong> input and output channels can<br />
be controlled via the control unit of the<br />
respective basic module carrier UFG 712<br />
or UFG 708/19“.<br />
<strong>The</strong> conversion occurs via the IF of 10.7 MHz,<br />
and any conversion combination is possible.<br />
<strong>The</strong> frequency plan on the input is 25 kHz<br />
and on the output 50 kHz.<br />
Multi-range amplifier UFO 720<br />
FM 4-way converter UFO 711<br />
<strong>The</strong> multi-range amplifier UFO 720 is designed for reception of terrestrial<br />
TV and radio programmes. Each individual TV programme is selectively<br />
amplified, and an individual level matching is carried out.<br />
<strong>The</strong> amplifier module is equipped with two UHF inputs, one VHF input,<br />
FM input and one output as well as channel filter for nine UHF channels,<br />
two VHF channels and the FM range.<br />
Output<br />
FM<br />
Input<br />
FM D<br />
Input<br />
VHF C<br />
Input<br />
UHF B<br />
Input<br />
UHF A