DVB-PC TV Stars

Recommendations

Info

User’s Guide DVBViewer TE2 Enhanced options Figure 2.59: Options “Enhanced” Network Interface: Please select here the IP address of the network card you are using for streaming video/audio data via multicast. IP-Address: Enter the multicast IP for streaming video/audio data. Port: 26 Here you can change the port you are using for your multcast stream. SiehFernInfo (Scan): You start the download process of the service content by pressing the Scan button. The update process might take between 30 and 45 minutes. You cannot use DVBViewer TE2 for any other task while the download of the SFI data is in progress. The EPG data from SFI service will be merged within the EPG database and can be accessed by using the EPG Window. The TechniSat SiehFernInfo service is hosted on the satellite Astra 1G at 19.2° E and can be received in Europe only. This service is limited to German channels only.
Hardware options Figure 2.60: Options “Hardware” User’s Guide DVBViewer TE2 Scan Devices: DVBViewer TE2 will search for new DVB devices attached to your PC since the last usage of DVBViewer TE2. Mode for low Bandwidth (USB 1.1): If you are using an older USB 1.1 device only capable of lower bit rates this option optimises the playback especially for those types of devices. Stop Stream while tuning: For switching between diff erent channels more fasten please use this option. Has CI module: If your device has an integrated CI slot/module you can enable this functionality by activating this option. The CAM menu dialog itself is located under: DVBViewer TE2 -> Settings -> Conditional Access Module Is DVB-S2 device: To activate the DVB-S2 support within DVBViewer TE2 please enable this checkbox (your DVB-S must be capable of DVB-S2). Remote: To select the IR receiver type press the “Remote” button. The remote control selection dialog will pop up. 27
Page 1 and 2: DVB-PC TV Stars User’s Guide DVB
Page 3 and 4: Chapter 1: Introduction Using print
Page 5 and 6: Figure 2.02: Remote control setting
Page 7 and 8: Figure 2.07 WinLIRC Error User’s
Page 9 and 10: User’s Guide DVBViewer TE2 Confi
Page 11 and 12: Device support User’s Guide DVBVi
Page 13 and 14: Control and tool Bar Figure 2.21: c
Page 15 and 16: Figure 2.36: control bar -> mute bu
Page 17 and 18: User’s Guide DVBViewer TE2 To add
Page 19 and 20: . Figure 2.46: main window during D
Page 21 and 22: Figure 2.50: EPG window -> timeline
Page 23 and 24: Subtitles User’s Guide DVBViewer
Page 25: Figure 2.58: Options “General”
Page 29 and 30: User’s Guide DVBViewer TE2 For so
Page 31 and 32: User’s Guide DVBViewer TE2 To add
Page 33 and 34: Chapter 4: Managing TV/radio channe
Page 35 and 36: You must enter the name for the tar
Page 37 and 38: Chapter 5: IP multicast streaming U
Page 39 and 40: On our server, we open “Settings
Page 41 and 42: ... and then select the option “O
Page 43 and 44: Figure 6.03: New updates are availa

DVB-PC TV Stars

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?