C80prox Marklin Digital Control Program for PC's

More documents

Recommendations

Info

C80prox – Marklin Digital Control Program for PC’s will invoke c80prox or setpro using the configuration found in myconfg file. The "/c:" switch must be the last item on the command line. The setpro program also uses this switch to build and edit this alternate configuration. If the "/c:" switch is not specified, c80prox and setpro will default to the standard configuration file, "c80pro". The DOS extension of ".INI" does not need to be entered. Locomotive Speed Mapping The Marklin Motorola Digital System defines 15 physical speed settings, 0 to 14. C80prox gives you the ability to modify the speed settings for locomotives when under computer control. By editing the DOS file ‘c80speed.ini’ in the main C80prox directory this can be achieved. The format of this file is as follows: Addr1,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14 Addr2,s1,s2,s3,s4,s5,s6,s7,s8,s9,s19,s11,s12,s13,s14 Each line in the ‘c80speed.ini’ file MUST contain exactly 15 entries. The first entry is the Digital Address of the locomotive and the remaining 14 entries define the speed mapping for that address. You cannot map speed 0. Example Line 1: 63,3,3,3,4,5,6,7,8,9,10,11,12,12,12 Here locomotive address 63 will have the following speed map: 0 = 0, 1= 3, 2 = 3, 3 = 3, 4 = 4, 5 = 5, 6 =6, 7 = 7, 8 = 8, 9 = 9, 10 = 10, 11 = 11, 12 = 12, 13 = 12 and 14 = 12. Page 34 Version 1.1 October 16, 2003
C80prox – Marklin Digital Control Program for PC’s Appendix A Marklin Part No. 4999 Digital Vista Dome Car with Functions The digital vista dome car is equipped with a permanent built-in function module. It can be operated from the C80prox program using the address "10", with the "fc" command. The following function can be switched by remote control. Function Meaning F1 Waiter moves forward F2 Waiter moves in reverse F3 Turn table lamps on/off F4 Turn compartment ceiling lights on/off These functions can be activated either when the car is moving or standing still, as long as it is being operated on the Digital system. Marklin Part No. 4998 Digital Dance Car with Functions The digital dance car is equipped with a permanent built-in function module. It can be operated from the C80prox program using the address "20", with the "fc" command. The following function can be switched by remote control. Function Meaning F1 Turn ceiling lights on/off F2 Couples start/stop to whirl around the dance floor F3 Start/Stop Music Latin Rock Boogie Tango Tales from the Vienna Woods (Waltz) Rock ‘n’ Roll Aura Lee F4 Select next piece of music These functions can be activated either when the car is moving or standing still, as long as it is being operated on the Digital system. Page 35 Version 1.1 October 16, 2003
Page 1 and 2: C80prox Marklin Digital Control Pro
Page 3 and 4: C80prox - Marklin Digital Control P
Page 33: C80prox - Marklin Digital Control P
Page 39: C80prox - Marklin Digital Control P

C80prox Marklin Digital Control Program for PC's

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?