You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation<br />
Powering Up<br />
Banknote<br />
Validator<br />
Coin Box<br />
<strong>Page</strong> 6<br />
1. Attach the power cord beside the on/off switch at the rear of the machine. Plug the<br />
machine into a standard AC outlet.<br />
2. The machine must be grounded. Do not use a cheater plug.<br />
3. <strong>JVL</strong> recommends installing the machine with an external surge suppresser with a builtin<br />
circuit breaker. Suitable surge protectors are available at most hardware and electrical<br />
supply stores.<br />
The box and all packing materials should be stored in case the machine needs to be<br />
returned to an authorized <strong>JVL</strong> service center at a later date.<br />
The machine requires a few minutes to power up during which time the computer carries<br />
out an extensive systems diagnostics check. If no problems are detected, the opening<br />
screen will appear. If problems are detected, please refer to the troubleshooting guide<br />
(page 46).<br />
Although the machine has been preset and is ready for play, it is recommended that an<br />
operator run the initial tests, calibrate the touch screen, and test the coin acceptor and<br />
banknote validator. (Chapter 2 - Setup and Adjustments)<br />
With the exception of the Eclipse Countertop, all North American machines can be equipped<br />
with either a Cashcode or MARS validator. For international markets, the exporter installs<br />
the appropriate coin mechanism and/or Banknote validator.<br />
The Eclipse can be equipped only with Mard Bill Acceptor (500 Bill)<br />
All machines come equipped with Coin Box.<br />
Capacity:<br />
Eclipse -<br />
Orion -<br />
Conquest -<br />
* capacity is based on US 25c piece.
Change language