eWON Family

3.3.4 COM Setup section
Warning: depending on eWON's version (c.f. Table 198 on page 209)
General Reference Guide eWON Configuration
The second link of the System setup is the communication setup. All Ethernet, modem and PPP TCP/IP
connectivity parameters are defined here.
The tree menu is divided into 4 sub-menus, which classifies the COM setup into functional systems: Interfaces,
Network connections, Networking Config and Manage Config.
Once totally expanded, the tree menu looks like the one shown on the right.
• Important: This COM configuration is not saved in the eWON flash file system, it means that formatting
the eWON will not erase this configuration. This allows formatting the eWON remotely and ensuring that
communication is still possible after formatting. Nevertheless, the Default Config menu allows the user
to return to default well known communication values.
3.3.4.1 Interfaces setup
The Interfaces menu groups the hardware configuration of the means of
communications.
These interfaces are:
• the Modem (optional)
• the Ethernet-1-LAN (always present)
• the Ethernet-2-WAN (only on eWONx005 & eWONx005CD)
• the ADSL (only on eWONx104)
Therefore, eWON will show you only the interfaces available on your device.
RG-001-0-EN ver 1.10 eWON® - 09/09/2010 - ©eWON sa Page 29