6a Garment Specification Form - The Warehouse
6a Garment Specification Form - The Warehouse
6a Garment Specification Form - The Warehouse
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10a: How to Measure: Lengths (A)<br />
A1 Total length - HSP to hem<br />
On the front, measure from the high shoulder point<br />
where the shoulder seam meets the neck seam, or<br />
at the neck edge. If garment has forward shoulder<br />
seams, measure at the point where the garment<br />
naturally folds. This is measured to the hem. If<br />
garment has shaped hem, measure to the point<br />
which is level with the centre front.<br />
A2 Total length - LSP to hem<br />
On the front, measure from the low shoulder point<br />
where the shoulder seam meets the armhole. If<br />
garment has forward shoulder seams, measure<br />
at the point where the garment naturally folds.<br />
This is measured to the hem. If garment has<br />
shaped hem, measure to the point which is level<br />
with the centre front.<br />
A3 Sideseam length (garments for upper body)<br />
Measure on sideseam from underam point<br />
to hem.<br />
A4 Sideseam length (skirts)<br />
Measure on sideseam from waist edge<br />
to hem. If garment has a waistband, then<br />
measure from the top edge of the<br />
waistband.<br />
A4<br />
A3<br />
A1<br />
A2<br />
A1<br />
A3<br />
A4<br />
A2<br />
A1<br />
Continued on next page<br />
36<br />
Quality Assurance Guide, Volume Two (version 1.3)