6a Garment Specification Form - The Warehouse

10p: How To Measure: Maternity (P), Continued
P6 Back hem width
On the back, measure from sideseam to sideseam straight
across the garment at the base of the sideseams.
P7 Waist from HSP (garments for upper body)
On the front,measure straight from the HSP to the narrowest
point for the waist shaping position.
P8 Total length from HSP - Front
On the front, measure from the high shoulder point
where the shoulder seam meets the neck seam, or
at the neck edge. If garment has forward shoulder
seams, measure at the point where the garment
naturally folds. This is measured to the hem. If
garment has shaped hem, measure to the point
which is level with the centre front.
P9 Total length from HSP - Back
On the back, measure from the high shoulder point
where the shoulder seam meets the neck seam, or
at the neck edge. If garment has forward shoulder
seams, measure at the point where the garment
naturally folds. This is measured to the hem. If
garment has shaped hem, measure to the point
which is level with the centre back.
P6
P7
P8
P9
Continued on next page
71
Quality Assurance Guide, Volume Two (version 1.3)