6a Garment Specification Form - The Warehouse
6a Garment Specification Form - The Warehouse
6a Garment Specification Form - The Warehouse
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10o: How to Measure: Pocket Widths and Positions (O),<br />
Continued<br />
O10 Pocket from waist<br />
Measure from the waist seam to<br />
the top edge of the pocket at the<br />
centre of the pocket. If the pocket<br />
is angled it must be as per the angle<br />
shown on the design sketch. If there<br />
is no waistband, measure from<br />
waist edge.<br />
O11 Pocket from sideseam<br />
Measure from side seam to<br />
the side edge of the pocket at the<br />
top of the pocket.<br />
O12 Pocket flap width<br />
Measure across the pocket flap at the<br />
widest point<br />
O13 Pocket flap depth<br />
Measure across the pocket flap at the<br />
widest point<br />
O14 Fob pocket width<br />
Measure across the pocket at the<br />
widest point<br />
O15 Fob pocket depth<br />
Measure across the pocket flap at the<br />
widest point<br />
O10<br />
O14<br />
O15<br />
O12<br />
O10<br />
O11<br />
O14<br />
O15<br />
O11<br />
O13<br />
O10<br />
69<br />
Quality Assurance Guide, Volume Two (version 1.3)