6a Garment Specification Form - The Warehouse

10s: How to Measure: Swimwear (S)
S1 Front chest width
On the front, measure from underarm to underarm
exactly at the top of sideseams.
S2 Front waist width
On the front, measure from sideseam to sideseam at the
narrowest point.
If there is no waist seam, the size chart must have a reference
point for the waist shaping position (refer to S3).
S3 Front waist position from top of sideseam
On the front, measure from the top of sideseam to the
narrowest point for the waist shaping position.
S4 Front hip width
On the front, measure from the top of the leg depth from
sideseam to sideseam.
S5 Crotch width at seam
Measure across seam from edge to edge.
S6 Crotch width @ 6.5cm from seam
On the front, measure 6.5cm from the centre of crotch seam,
then measure across from edge to edge.
S7 Front leg depth
Measure straight from the top of leg shaping at sideseam to
a point level with crotch seam
S3
S1
S2
S4
S6
S5
S9
S8
S11
S7
S10
Continued on next page
79
Quality Assurance Guide, Volume Two (version 1.3)