UniModSet / MetcomTSet - baer-gmbh.com
UniModSet / MetcomTSet - baer-gmbh.com
UniModSet / MetcomTSet - baer-gmbh.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UniModSet</strong> / <strong>Met<strong>com</strong>TSet</strong><br />
� Timeout:<br />
- By means of “keep alive” the interval can be set in which characters will be<br />
sent regularly to the GPRS-Bridge. This procedure supports keeping the<br />
GPRS-connection established: active for BAER protocol only.<br />
- If a connection to the GPRS net cannot be established after certain connection<br />
tries („Number of TCP connect request“), the modem switches automatically<br />
to the CSD-mode (dial mode).<br />
- After a settable pause (Time delay CSD −> GPRS) the modem tries again<br />
to log into the GPRS net (internet).<br />
- In “Half duplex“-operation the receive-buffer will be deleted while sending<br />
data.<br />
- Dynamically time delay between CSD and GPRS log on (5, 15, 60Min, 3,<br />
12, 24hours delay by errors), alternatively to fix time delay<br />
- Since the firmware version #90 is possible to activate a test mode: shows<br />
information about log on to the GPRS network via service interface; use only<br />
for testing, deactivate please this function after the tests!<br />
31
Change language