User Manual - Kanmed

The Heating Pad, BW3-003
Page 8 of 28
User Manual BW3-070/2
The Heating Pad consists of an electric element with four integrated temperature sensors. The design and
construction of the Heating Pad has reduced the magnetic and electrical fields to normal background levels
and thereby making them harmless. The Heating Pad voltage is 24V DC.
See technical data for information about warming up times.
Location of the integrated
temperature sensors.
T1 and T3: temperature of the Mattress
T2 and T4: temperature of the Heating
element
Explanation of the markings on the Heating Pad
The Water Mattress
1. Read the manual!
2. Always use a Kanmed Water (H 2O)
or Gel (//////) Mattress.
Never place a baby directly on
the Heating Pad!
3. The Heating Pad must be inserted in the
pocket under the Mattress.
(This is best done if the Mattress is placed
upside down on a flat surface).
When filled to the level mark a standard Water Mattress contains about 4.2 litres of water. Always add
Kanmed Water Conditioner when the Water Mattress is filled. The water level should be checked frequently
and water must be added if required. Big air bubbles must be removed. When used for the first time,
please write the date of expiry in the box (one year into the future).
Explanation of the markings on the Water Mattress
1. Instructions for Kanmed Water
Mattresses
Fill with tap water up to the MAX indication line.
Add one Bottle of Kanmed Water Conditioner BW-
50-029.
Change water when the water is below the MIN
level line and add one bottle of Kanmed Water
Conditioner BW-50-029.