5 EA eDIP320-8 commands - Electronic Assembly
5 EA eDIP320-8 commands - Electronic Assembly
5 EA eDIP320-8 commands - Electronic Assembly
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16<br />
4.9 SystemMacros<br />
<strong>EA</strong> <strong>eDIP320</strong>-8 compiler help<br />
POWERONMACRO: All <strong>commands</strong> defined in this macro will be automatically executed<br />
when the power supply is switched on.<br />
RESETMACRO: All <strong>commands</strong> defined in this macro will be automatically executed<br />
when an external reset on Pin 5 is done.<br />
WATCHDOGMACRO: All <strong>commands</strong> defined in this macro will be automatically executed<br />
when the display hangs up.<br />
BROWNOUTMACRO: All <strong>commands</strong> defined in this macro will be automatically executed<br />
when VDD brakes down to 4,6V or lower.<br />
WAKEUPPINMACRO: Starts up again when the display was in PowerDown mode and PIn13<br />
goes to LO.<br />
WAKEUPTOUCHMACRO: Starts up again when the display was in PowerDown mode and the<br />
touchpanel is touched.<br />
WAKEUPI2CMACRO: Starts up again when the display was in PowerDown mode and<br />
<strong>commands</strong> are arriving through I2C interface.