Certificate of Approval

More documents

Recommendations

Info

- The owner of the approval is solely responsible (product liability) for ensuring adherence to other technical specifications and generally applicable mandatory product-related regulations and technical standards regarding safety and the environment. - Any misuse or misleading use of this approval will result in its immediate withdrawal in accordance with the instructions mentioned above. This approval is valid only when signed by both the owner of the approval and the issuing office. Swiss Federal Office for Civil Defence Infrastructure Approval office Manager Werner Hunziker Place and date: Berne Attached: Test reports Technical documents Owner of the approval Place and date: Copy for information, to: BABS, Laboratory Spiez / ABC Civil Defence Technologies 3700 Spiez
LABORATORY SPIEZ CH-3700 Spiez Switzerland Test Department for ABC Civil Defence Material Test Report Test report no.: AGEW 2006-011 Page 1/9 Applicant: Swiss Federal Office for Civil Defence, Civil Defence Infrastructure, 3003 Berne Order: Testing Hilti HSC safety anchors from the Hilti Corporation, FL-9494, Schaan, for reliability under shock loading Summary: 14 Hilti HSC-A M8x40 safety anchors manufactured from galvanized steel (approval no.) BZS D 06-601) were tested on the 10-ton vertical shock testing system under dynamic loading when set in cracked concrete. Each anchor was subjected to two successive shock loads of 5.5 kN. Total displacement (slip) was within the 0.209 mm to 1.381 mm range. Spiez, June 27, 2006 00610/BAK Signed : Author : LABORATORY SPIEZ LABORATORY SPIEZ LABORATORY SPIEZ ABC-Protection ABC-Protection ABC-Protection Manager Mechanical Actions Mechanical Actions Ed. Bingerli T. Friedrich K. Bachmann Enclosure: - European Technical Approvals ETA-02/0027; ETA-02/0028 - Assessment no. 7517.02 from Bürkel Baumann Schuler, 8400 Winterthur Distribution: Laboratory Spiez, Certification Department [4 copies] The content of this test report refers only to the test subject / object. Without prior permission from the LABORATORY SPIEZ, no extracts but only the full text of this test report may be published.
Page 1: Swiss Federal Office for Civil Defe
Page 5 and 6: Hilti HSC / HSC-R safety anchor Pag

Certificate of Approval

Create successful ePaper yourself

Delete template?

Save as template?