You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5<br />
Page 144<br />
Extended Nose - Straight<br />
Round<br />
Eccentric<br />
Hexagon<br />
Eccentric to Corner<br />
Rectangular Rectangular<br />
Eccentric - Short Side Eccentric - Long Side<br />
Special Extruded Shapes for Collets,<br />
Step Chucks and Feed Fingers<br />
Extended Nose - Tapered<br />
Hexagon<br />
Eccentric to Flats<br />
Octagon<br />
Eccentric to Flat<br />
Square<br />
Eccentric to Flats<br />
Octagon<br />
Eccentric to Corner<br />
Information Required:<br />
• An extrusion drawing indicating the centerline of the shape in relationship to the centerline of the<br />
collet.<br />
• Sample stock is required. If not available, manufacturing authorization is required prior to entry<br />
of order. If approved, item(s) will be manufactured with customer assuming full responsibility.<br />
• The confirming order.<br />
Stock Requirements – When ordering 1 to 3 collets: One 6" length of stock is needed; 4 to 7<br />
collets: Two 6" lengths; 8 to 11 collets: Three 6" lengths; 12 to 15 collets: Four 6" lengths required.<br />
Threaded Order Hole<br />
Taper - Regular Taper - Reverse Over-The-Shoulder<br />
Angular Slotted Zig Zag Slots<br />
Square<br />
Eccentric to Corner<br />
Flat Face<br />
Send Drawings and Sample<br />
Parts (RMA Required) to:<br />
<strong>Hardinge</strong> <strong>Inc</strong>.<br />
One <strong>Hardinge</strong> Drive<br />
Elmira, NY 14903<br />
NOTE: RMA = Return Material Authorization<br />
Information – Quote –To Order<br />
Phone: 800-843-8801<br />
Fax: 607-737-0090<br />
Canada: 800-468-5946<br />
Other countries: 607-734-2281<br />
International Fax: 607-734-1701<br />
3-Split Collet Configurations 4-Split Collet Configurations<br />
Triangular
Change language