IP Based 'Trunk-side' - CommPartners Connect

More documents

Recommendations

Info

Configuration of a Primary DNS server is performed in the “Hostname/DNS” fields below: The ability to Add/Modify/Delete user accounts is performed below under the “Stations” settings:
If the configuration wizard was used for the initial setup, then these fields should already be set: The S<strong>IP</strong> Dial Plan can be manually configured below to control the dial plan parameters:
Page 1 and 2: SIP DS0 Service IP Based ‘Trunk-s
Page 3 and 4: II. Configuration Wizard Setup thro
Page 5 and 6: The first prompt will ask the user
Page 7 and 8: Configuration parameters for the SI
Page 9: The “IP Services” section will
Page 13 and 14: Be sure to create the codec order s
Page 15 and 16: Enable “IP Routing” when utiliz
Page 17 and 18: FXS PROVISIONING: interface fxs 0/1
Page 19 and 20: interface t1 0/2 framing esf coding
Page 21 and 22: did digits-transferred 4 (Number of
Page 23 and 24: Analog User - Station Configuration
Page 25: Show media-gateway Channel Info Ses

IP Based 'Trunk-side' - CommPartners Connect

Create successful ePaper yourself

Delete template?

Save as template?