Chapter 3 - Rolling of metals
Chapter 3 - Rolling of metals
Chapter 3 - Rolling of metals
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Hot mill can be provided with<br />
facilities for crown control to<br />
improve the control <strong>of</strong> the<br />
pr<strong>of</strong>ile <strong>of</strong> hot strip mill.<br />
• For example work roll<br />
bending with continuous<br />
variable crown and pair cross<br />
mills.<br />
•The roll cross angle <strong>of</strong> rolls incorporated<br />
in a stand <strong>of</strong> each rolling mill is set at a<br />
predetermined value beforehand.<br />
• If there is a roll cross angle that will<br />
enable a target sheet crown to be applied<br />
to each sheet and the roll bender load <strong>of</strong><br />
each stand is adjusted on-line, thereby<br />
effecting sheet crown control.<br />
Suranaree University <strong>of</strong> Technology Tapany Udomphol<br />
Jan-Mar 2007