Catalog 2010 Technology for Vacuum Systems - Chiron

64
Chemistry diaphragm pumps down to 1.5 mbar
Chemistry diaphragm pump
MD 12C
Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive
gases and vapors and meet the highest requirements. The three-stage construction of the eight head MD 12C pump
provides the advantageous combination of high pumping speed and very low ultimate vacuum. All internal parts in
contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms
for increased reliability and extended operating life. The PC 8 accessory kit offers upgrading to a system with solvent
recovery.
MD 12C
8.3 m³/h
2 mbar
PERFORMANCE FEATURES APPLICATIONS
outstanding chemical resistance and superior vapor
■ tolerance
■
■
exceptionally high performance even at low vacuum
reduced process times
■ excellent environmental friendliness due to efficient
solvent recovery (with optional emission condenser)
■
long diaphragm life, maintenance-free drive system
Further information at www.vacuubrand.com
The high pumping speed of the MD 12C reduces the process
time and meets the high vacuum requirements e.g.,
of parallel processes in vacuum networks. Typical applications
are large rotary evaporators and pilot plants.
Upgraded with a separator at the inlet (accessory), the
MD 12C is well prepared also for rough operating conditions.
With a waste vapor condenser (accessory) at the
outlet, the pump offers excellent environmental friendliness
due to efficient solvent recovery.