Catalog 2010 Technology for Vacuum Systems - Chiron
Catalog 2010 Technology for Vacuum Systems - Chiron
Catalog 2010 Technology for Vacuum Systems - Chiron
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
78<br />
Accessories <strong>for</strong> chemistry diaphragm pumps<br />
Accessories <strong>for</strong> chemistry pumping units<br />
■ Liquid level sensor <strong>for</strong> VACUUBRAND catchpot 500 ml<br />
The liquid level sensor is designed to be assembled on the neck of a VACUUBRAND 500<br />
ml catchpot and works with the CVC 3000 or VNC 2 controllers to monitor the liquid level<br />
in catchpots of emissions condensers and inlet separators. The process is halted and an<br />
alarm sounded if the catchpots are close to overflowing. The sensor detects all common<br />
solvents without any contact to the solvents.<br />
For the VACUUBRAND emission condenser type EK 1000 (used, e.g., in pumping units PC<br />
8 and PC 301x VARIO) a suitable liquid level sensor is available, too.<br />
■ Separator AK PC 8<br />
This separator has a catchpot with good chemical resistance and offers optimal condensate<br />
control. Using its small flange KF DN 25 outlet, this separator can be directly mounted at<br />
the inlet of VACUUBRAND "double-star"-type (eight-head) diaphragm pumps. The vacuum<br />
system can be connected using a small flange KF DN 25 or a hose nozzle DN 15 mm.<br />
■<br />
Exhaust vapor condenser EK PC 8<br />
The exhaust waste vapor condenser EK PC 8 is designed <strong>for</strong> large flow rates of condensable<br />
vapors. The condenser is thermally isolated and offers an increased collection volume of<br />
1 liter (flask). The condenser is assembled on a plat<strong>for</strong>m <strong>for</strong> diaphragm pumps with eight<br />
heads.<br />
ORDERING INFORMATION<br />
Liquid level sensor <strong>for</strong> VACUUBRAND catchpot 500 ml<br />
Liquid level sensor <strong>for</strong> VACUUBRAND emission condenser EK 1000<br />
Separator AK PC 8<br />
Upgrade kit complete exhaust vapor condenser EK PC 8 with base plate <strong>for</strong> pump<br />
Cooling water valve VKW 230 V IEC plug EN 60320<br />
Cooling water valve VKW 230 V UK<br />
Cooling water valve VKW 230 V CEE<br />
Silencer with hose*<br />
SPARE PARTS<br />
Exhaust vapor condenser EK PC 8<br />
Catchpot 1 liter <strong>for</strong> exhaust vapor condenser EK PC 8<br />
Catchpot clip <strong>for</strong> KS 35/25 (suitable <strong>for</strong> all VACUUBRAND glass catchpots)<br />
Further in<strong>for</strong>mation at www.vacuubrand.com<br />
699908<br />
699909<br />
699980<br />
699949<br />
676010<br />
676012<br />
676014<br />
636588<br />
* Attention: Dust-laden gases, deposits and condensed vapors can restrict the gas flow out of the silencer.<br />
The resultant back pressure can lead to damage of pump bearings, diaphragms and valves. Under those conditions,<br />
a silencer must not be used.<br />
699975<br />
699976<br />
637627