Robotic and Manual Pan & Tilt Head - Vinten Radamec

Index
abrasives 17
accessories, Optional 20
accessories, optional 1
accessories, standard 1, 20
A
B
balance, check 19
balance, horizontal 8
balance, setting fore and aft 8
Balancing the head and payload 8
C
cable restraint 7
cable, analogue focus 7
cable, analogue zoom 7
cable, ethernet 12
cable, Head Communication 5
cable, RS232 focus and zoom 7
cable, Studio Floor 5
cable, USB System Configuration 7
cables, camera lens 7
cables, dressed 5
Cables, Power and Ethernet 5
cables, power and ethernet, check 19
cables, re-fit 17
Cabling 20
camera cradle 3, 8
camera cradle, check 19
camera lens cabling 7
camera number, setting 16
camera online 14
camera, fitting of 3
cleaners 17
Configuration Tools 20
Connecting the Head to a Fusion Height Drive 6
Connecting, Head to a Fusion pedestal 5
connection ports 17
Control Panel 5
Control Panel, selecting robotic mode 14
D
drag adjustment dials 16
drag control dials, adjusting 18
E
electrical connection 17
emergency stop button, pedestal 5
EPL cables 5
EPL Node 5
EPL Output port, Height Drive 5
Ethernet ports 5
external ports 5
F
fixing bolts, standard accessory 2
focus/digital port 7
fuse compartment 18
fuse, changing 18
fuses, check 19
Fusion Height Drive 5
Fusion Pedestal 5
Fusion Robot Control window 12
Fusion Setup & Test icon 10
Fusion Setup & Test software tool 7
Height Drive 5
Intermediate Plate 3
lens 8
lens drive 7
main assemblies 20
Maintenance 17
mounting plate, four-hole 2
mounting plate, reposition 8
operating, not 19
Optional accessories 20
H
I
L
M
O
P
packaging, shipping container 1
pan and tilt axes, limits 12
pan and tilt drag, adjusting 16
pan and tilt limits, check 19
pan axis 12
pan drag adjustment dial 16
payload 3
Pedestal 5
pedestal 5
positive direction of travel 12
A-1