19.01.2013 Views

DG-1000T - DG Flugzeugbau

DG-1000T - DG Flugzeugbau

DG-1000T - DG Flugzeugbau

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Flight manual <strong>DG</strong>-<strong>1000T</strong><br />

1.1 Introduction<br />

The motorglider flight manual has been prepared to provide pilots and<br />

instructors with information for the safe and efficient operation of the <strong>DG</strong>-<br />

<strong>1000T</strong> glider.<br />

This manual includes the material required to be furnished to the pilot by JAR<br />

Part 22. It also contains supplemental data supplied by the glider manufacturer.<br />

1.2 Certification basis<br />

This type of motorglider has been approved by the EASA in accordance with:<br />

Airworthiness requirements:<br />

JAR Part 22 „Sailplanes and powered sailplanes“, amendment 6, issued<br />

1. August 2001.<br />

The Type Certificate No. EASA.A.072 has been issued on January 27. 2006.<br />

Category of Airworthiness: "Utility" or<br />

„Aerobatic“ with 18m span without waterballast and<br />

if the required equipment is installed.<br />

Issued: July 2005 1.2<br />

Flight manual <strong>DG</strong>-<strong>1000T</strong><br />

1.3 Warnings, cautions and notes<br />

The following definitions apply to warnings, cautions and notes used in the<br />

flight manual.<br />

"Warning" means that the non observation of the<br />

corresponding procedure leads to an<br />

immediate or important degradation of the<br />

flight safety.<br />

"Caution" means that the non observation of the<br />

corresponding procedure leads to a minor or<br />

to a more or less long term degradation of<br />

the flight safety.<br />

"Note" draws the attention on any special item not<br />

directly related to safety but which is<br />

important or unusual.<br />

Issued: July 2005 1.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!