Download - Freiwald Software

More documents

Recommendations

Info

X 5 Run-In of Locomotives The run-in of new or repaired locomotives is supported by an auxiliary window called „Run-In“. Diagram 19: Run-In The window provides the ability to create a sequence of actions for the run-in of locomotives. These actions are executed successively to support the automatic run-in of locomotives. Possible actions are: • Speed and direction: this action sets the locomotive in motion in a certain direction. • Stop: stops the locomotive. • Delay: this action inserts a pause between two actions. If the previous action sets the speed of the locomotive, for example, then the locomotive runs with the set speed until the time specified as delay in the subsequent action has passed. In the above illustration the locomotive is started at speed step 14 and runs with constant speed for 10 minutes before it is stopped. The toolbar of this window provides options to edit the actions in the list to edit and to start, stop or interrupt the execution of the specified actions. 43
The actions should be performed with a locomotive on a roller test bench or on a circular layout to enable the locomotive to run at constant speed in the same direction for a longer time. 44
Page 1 and 2: RAILROAD & CO. ® TrainProgrammer
Page 3 and 4: Contact: Freiwald Software Kreuzber
Page 5 and 6: 3 The Test Panel ..................
Page 7 and 8: ! Several sections or paragraphs sh
Page 9 and 10: 8 Quick Start - Step 1: Installatio
Page 11 and 12: 10 Diagram 2: License Inquiry After
Page 13 and 14: 12 Diagram 4: Setup Digital Systems
Page 15 and 16: After Step 1 the screen display of
Page 17 and 18: 16 Diagram 7: Reading a Configurati
Page 19 and 20: 18 Quick Start - Step 3: Changing t
Page 21 and 22: 20 Quick Start - Step 4: Changing a
Page 24 and 25: Part II Fundamentals B 23
Page 26 and 27: • Lenz Digital Plus • Digitrax
Page 28 and 29: Please do not mistake decoder confi
Page 30 and 31: menu and tool bar symbols for comma
Page 32 and 33: B 2 Working with the Decoder Window
Page 34 and 35: B ! ! All other configurations only
Page 36 and 37: Diagram 14: Explorer Window The con
Page 38 and 39: The profile mode is also useful for
Page 40 and 41: X There are also features to change
Page 42 and 43: 3 The Test Panel The Test Panel is
Page 46 and 47: X 6 Use of a Roller Test Bench An a
Page 48 and 49: X 7 The Decoder Database This chapt
Page 50 and 51: Diagram 22: Editing a Decoder Confi
Page 52 and 53: without the need to bother with the
Page 54 and 55: The values of formulas are displaye
Page 56 and 57: References are useful, if a series
Page 58 and 59: Appendix: Troubleshooting Problems

Download - Freiwald Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?