Backyard Circus Club

More documents

Recommendations

Info

Step 7b *NOTE: Install Rail Uprights as shown below if installing Cabin package. 1. Attach Rail Uprights w/Handle Holes (226) to 6 Hole Facia (647), Facia w/Rope Hole (645), and Corner Facias (664) using #8 Hardware (H152) (as shown). Flush outside faces (as shown in Detail A). 2. On sides A, B, and C evenly space Rail Uprights (200) (as shown) and attach to 6 Hole Facias (647), Corner Facias (664), and Facia w/Rope Hole (645) using #8 Hardware (H194). 3. Evenly space and attach Rail Uprights (200) (659) to Top Joist (643) and 2 Hole Facia (644) (as shown) using #8 Hardware (H194). 645 647 200 226 226 A H152 B 664 200 226 Rail Installation (for sets with Cabin Package) H194 664 26b 643 664 FACES FLUSH 659 H194 C DETAIL A 200 664 226 200 647 644 200
Step 8 H32 N21 222 H7 H170 H34 Rock Wall & Step Ladder T-Nut Installation *NOTE: Do not fully tighten 3/8" Hardware (H184) (H124) in this step. 1. Position Step Ladder Legs (222) (223) and Rock Wall Legs (353) as shown and install 3/8" Hardware (H34) into pre-drilled holes. A small hammer or mallet may be used to gently tap hardware flush with the wood. 2. Install 1/4" Hardware (H32) into pre-drilled holes of Rock Wall Boards (331) (333). Only two Rock Wall Boards are shown, be sure to complete this step for all Rock Wall Boards (331) (333). 3. Attach 90 Bracket (N9) to Step Ladder Legs (222) (223) using 3/8" Hardware (H11) (H34) (H184). 4. Attach 90 Bracket (N9) to Rock Wall Legs (353) using 3/8" Hardware (H11) (H34) (H124). 5. Attach Rocks (N21) to Rock Wall Boards (331) (333) using 1/4" Hardware (H7) (H170). *NOTE: Four 1/4" SAE Washers (H7) must be used per Rock installation (as shown). H11 H184 N9 H34 H32 27 223 N9 H34 N21 H7 H170 333 353 N9 H34 353 N9 H11 H124 331
Page 1 and 2: Backyard Circus Club Assembly Instr
Page 3 and 4: Thoroughly read all Safety Instruct
Page 5 and 6: TABLE 3.1 Fall Height in Feet From
Page 7 and 8: COMMONLY ASKED QUESTIONS Question:
Page 9 and 10: 57 58 353 427 646 418 640 226 664 4
Page 11 and 12: 247 2@ 1 x 4 x 17" Fan Vertical (3-
Page 13 and 14: N20 N8 1@ Ship's Wheel (5-41-0021)
Page 15 and 16: N24 55 54 57 56 662 661 660 58 418
Page 17 and 18: H7 H1 H30 H32 H34 H28 H17 H24 HARDW
Page 19 and 20: H100 HARDWARE FOR ASSEMBLY *NOTE: T
Page 21 and 22: 418 418 Step 1 INSET A 638 DETAIL B
Page 23 and 24: Step 3 N8 H164 646 INSET A H163 H7
Page 25 and 26: Step 5 664 638 DETAIL A 664 H108 H1
Page 27: Step 7 *NOTE: Install Rail Uprights
Page 31 and 32: Step 10 *NOTE: To ease assembly, as
Page 33 and 34: Step 12 715 408 Slide Installation
Page 35 and 36: Step 14 H56 H4 N29 N10 H11 H3 H17 H
Page 37 and 38: Step 15 Continued from previous pag
Page 39 and 40: Step 17 648 INSET A H108 638 H1 647
Page 41 and 42: Step 19 H131 H11 638 639 H30 H3 651
Page 43 and 44: Step 21 1. Position Roof Frame Side
Page 45 and 46: Step 23 404 H194 401 412 404 A INSE
Page 47 and 48: Step 25 358 364 365 366 367 368 369
Page 49 and 50: Step 27 H154 H152 379 H194 INSET A
Page 51 and 52: Step 29 662 661 57 660 58 H154 53 H
Page 53 and 54: Step 31 1 1/2" 1 1/2" 2 Position Sw
Page 55: Limited Seven-Year and One-Year War

Backyard Circus Club

Create successful ePaper yourself

Delete template?

Save as template?