Backyard Circus Club
Backyard Circus Club
Backyard Circus Club
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step 18<br />
644<br />
INSET A<br />
644<br />
H182<br />
N264<br />
Tarp Installation<br />
1. Evenly spread Tarp (N264) over the top of the 2 Hole Facia (644) (as shown). Female ends of the<br />
tarp snaps should face in towards each other when the tarp is freely hanging.<br />
2. Wrap Tarp (N264) around the bottom side of 2 Hole Facias (644). Starting with the middle tarp<br />
snap, work your way out gently tapping each tarp snap to leave an indentation in the wood.<br />
3. Install Snap Screws (H182) in the center of the indentations.<br />
*NOTE: Snap Screws (H182) are rolled up in the Tarp.<br />
4. Snap the Tarp (N264) to the Snap Screws (H182).<br />
5. Repeat parts 2, 3, and 4 for the other side. Ensure Tarp (N264) is pulled tight when marking Snap<br />
Screw (H182) locations.<br />
38<br />
644<br />
N264<br />
644