Fiesta Playhouse Hardware List
Fiesta Playhouse Hardware List
Fiesta Playhouse Hardware List
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 15<br />
591<br />
N261<br />
N261<br />
522<br />
H194<br />
559<br />
H157<br />
N262<br />
5/16" PILOT<br />
HOLE DETAIL A<br />
573<br />
Door Installation<br />
1. Center and attach Hinges (N262) to bottom Door Facia (573) and Arched Door Trim (593) using<br />
<strong>Hardware</strong> provide in Hinge bag (as shown in INSET A).<br />
2. Using a helper, center and attach door assembly to Corner Facia (559) and 2 Hole Facia (591)<br />
using <strong>Hardware</strong> provided in Hinge bag. The gaps should measure 5/8" on top and sides, and 1/8"<br />
on the bottom when properly installed.<br />
3. With door closed and handle down in locked position, position Door Stop (N261) against the<br />
inside of Door Upright w/Handle Holes (584) and mark placements for Standoff and screw<br />
(approximately 1 1/8" apart).<br />
4. Pre-drill 5/16" Diameter hole and insert Standoff.<br />
5. Position Door Stop (N261) on standoff and secure in place with screw provided in Door Stop Bag.<br />
231<br />
231<br />
559<br />
519<br />
559<br />
N262<br />
29<br />
H157<br />
5/8"<br />
559 559<br />
231<br />
5/8" 1/8" 5/8"<br />
N262<br />
573<br />
593<br />
584<br />
INSET A<br />
573
Change language