Bedienungsanleitung, Manuel, Manual, Manuale, 9113, PR ...

More documents

Recommendations

Info

signal and sensor error information via display front 4501 Sensor error (see limits in the table) is displayed as SE.BR (sensor break) or SE.SH (sensor short). Signals outside the selected range (not sensor error, see table for limits) are displayed as IN.LO indicating low input signal or IN.HI indicating high input signal. The error indication is displayed as text in line 2 for channel 1 and line 3 for channel 2 and at the same time the backlight flashes. Line 4 of the display is a status line which shows whether the device is SIL-locked (static dot = SIL-locked and flashing dot = not SIL-locked) as well as status for communication COM (running circle) indicating correct functioning of 4501. signal and sensor error indication without display front Status of the unit can also be read from the 3 LEDs in the front of the device. Green flashing LED indicates normal operation. No light in the green LED indicates lack of supply voltage or error in the device. Steady red LED indicates fatal error. Flashing red LED indicates sensor error. Advanced functions The unit gives access to a number of advanced functions which can be reached by answering “YES” to the point “ADV.SET”. Display setup: Here you can adjust the brightness contrast and the backlight. Setup of TAG numbers with 5 alphanumerics. Selection of functional readout in line 2 and 3 of the display - choose between readout of analogue input, analogue output or tag no or alternating display. Two-point process calibration: The device can be process-calibrated in 2 points to fit a given input signal . A low input signal (not necessarily 0%) is applied and the actual value is entered. Then a high signal (not necessarily 100%) is applied and the actual value is entered. If you accept to use the calibration, the device will work according to this new adjustment. If you later reject this menu point or choose another type of input signal the device will return to factory calibration. process simulation function: In the menu point “EN.SIM” it is possible to simulate an input signal by means of the arrow keys and thus control the output signal up or down. You must exit the menu by pressing 3 (no timeout). The simulation function exits automatically, if the 4501 is detached. password: Here you can choose a pass word between 0000 and 9999 in order to protect the device against unauthorised modifications to the configuration. The device is delivered default without password. 44 9113 - Product Version 9113-002
language: In the menu ”lang.setup” you can choose between 7 different language versions of help texts that will appear in the menu. You can choose between UK, DE, FR, IT, ES, SE and DK. power rail: In the menu ”RAIL” you can choose if sensor errors are transmitted to the central surveillance in the PR 9410 power control unit. safety integrity level: See Safety Manual for details 9113 - Product Version 9113-002 45
Page 1 and 2: 9 1 1 3 T e m p e r a t u r e / m A
Page 3 and 4: TEmpERATUR- / mA-KonvERTER 9113 InD
Page 5 and 6: moDTAgElsE og UDpAKnIng Udpak modul
Page 7 and 8: EF-ovEREnssTEmmElsEsERKlæRIng Som
Page 9 and 10: Indgangssignaler: Kanal 1: Strøm T
Page 11 and 12: estillingsnumre 9113bA = Temperatur
Page 13 and 14: Kapslingsklasse ...................
Page 15 and 16: gosT R godkendelse: VNIIFTRI, Cert
Page 17 and 18: Fejlsøgning Visning ved hardwarefe
Page 19 and 20: loKDIAgRAm Power rail forbindelser
Page 21 and 22: Dokumentation til rutediagram gener
Page 23 and 24: Power up �� 12 mA 100�C 1.0 3
Page 25 and 26: MEM, DISP, CAL, SIM, PASS, LANG, RA
Page 27 and 28: TEmpERATURE / mA ConvERTER 9113 Con
Page 29 and 30: RECEIpT AnD UnpACKIng Unpack the de
Page 31 and 32: As manufacturer EC DEClARATIon oF C
Page 33 and 34: Input signals: Channel 1: Current T
Page 35 and 36: order 9113bA = Temperature / mA con
Page 37 and 38: Protection degree .................
Page 39 and 40: gosT R approval: VNIIFTRI, Cert No.
Page 41 and 42: Error search Readout at hardware er
Page 43 and 44: Power Rail connections 31 32 33 NC*
Page 45: ConFIgURATIon / opERATIng ThE FUnCT
Page 49 and 50: 999.9 -199.9 1 2 0.0 OUT.LO Txt 14
Page 51 and 52: [01] [02] [03] [04] [05] [06] [07]
Page 53 and 54: ConvERTIssEUR pRogRAmmAblE, [Ex ia]
Page 55 and 56: RECEpTIon ET DEbAllAgE Déballez le
Page 57 and 58: En tant que fabricant DEClARATIon D
Page 59 and 60: Signaux d’entrée : Voie 1 : Cour
Page 61 and 62: Références de commande 9113bA = C
Page 63 and 64: Degré de protection ..............
Page 65 and 66: Approbation gosT R : VNIIFTRI, Cert
Page 67 and 68: Recherche erreurs Indication erreur
Page 69 and 70: Connexions au rail d’alimentation
Page 71 and 72: pRogRAmmATIon / opERATIon DEs ToUCh
Page 73 and 74: Fonction simulation : Si vous valid
Page 75 and 76: 999.9 -199.9 1 2 0.0 OUT.LO Txt 14
Page 77 and 78: [01] [02] [03] [04] [05] [06] [07]
Page 79 and 80: TEmpERATUR / mA WAnDlER 9113 InhAlT
Page 81 and 82: EmpFAng UnD AUspACKEn Packen Sie da
Page 83 and 84: Als Hersteller bescheinigt Eg-KonFo
Page 85 and 86: Eingangssignale: Kanal 1: Strom TE
Page 87 and 88: estellangaben 9113bA = Temperatur /
Page 89 and 90: Schutzart .........................
Page 91 and 92: gosT R Zulassung: VNIIFTRI, Cert No
Page 93 and 94: Fehlersuche Anzeige bei Hardware Fe
Page 95 and 96: Power Rail Verbindungen 31 32 33 NC
Page 97 and 98:
KonFIgURATIon / bEDIEnUng DER FUnKT
Page 99 and 100:
prozesssimulationsfunktion: Wenn Si
Page 101 and 102:
999.9 -199.9 1 2 0.0 OUT.LO Txt 14
Page 103 and 104:
[01] [02] [03] [04] [05] [06] [07]
Page 105 and 106:
IECEx Installation Drawing LERBAKKE
Page 107 and 108:
LERBAKKEN 10, 8410 RØNDE DENMARK H
Page 109 and 110:
LERBAKKEN 10, 8410 RØNDE DENMARK E
Page 111 and 112:
LERBAKKEN 10, 8410 RØNDE DENMARK R
Page 113 and 114:
LERBAKKEN 10, 8410 RØNDE DENMARK Z
Page 115 and 116:
Page 117 and 118:
LERBAKKEN 10, 8410 RØNDE DENMARK R
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Safety manual temperature / ma COnV
Page 125 and 126:
Safety Manual 9113 TeMpeRaTuRe / ma
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147:
Subsidiaries France PR electronics
show all

Bedienungsanleitung, Manuel, Manual, Manuale, 9113, PR ...

Create successful ePaper yourself

Delete template?

Save as template?