You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Part a:<br />
Tools and accessories<br />
6. Fusiotherm ® - electrical welding jig<br />
Art.-No. 50149<br />
for medium pipes of dimension 63 -125 mm<br />
NOTE:<br />
Just for the processing of climatherm OT <strong>ISO</strong>- medium<br />
pipes of dimension 32-125 mm, which are connected by<br />
socket welding, the following tools must be applied in addition.<br />
Before welding, the oxygen barrier layer at the pipe<br />
ends must be removed with these tools, as described on<br />
page 18.<br />
7. Fusiotherm ® -peeling tool<br />
as double peeling tool<br />
Art.-No. 50512 32 & 40 mm<br />
Art.-No. 50514 40 & 50 mm<br />
Art.-No. 50518 63 & 75 mm<br />
Art.-No. 50524 90 & 110 mm<br />
Art.-No. 50526 110 & 125 mm<br />
Instructions for the assembly<br />
of welding tools!<br />
➠ The heating plate of the welding device must be in<br />
good order and condition.<br />
➠ External damages like scratches or grooves and<br />
impurities must be removed.<br />
➠ The welding tools, consisting of 2 elements (male<br />
and female), must be free from damages and must<br />
be checked for cleanliness before processing.<br />
➠ If required, both parts of the tools must be cleaned<br />
with a non fibrous, coarse tissue and optionally with<br />
spirit.<br />
➠ Damaged tools generally must not be used.<br />
They must be exchanged.<br />
➠ Screw on the cold welding tools manually and tighten<br />
the screw hand-tight with the Allan key.<br />
➠ Welding tools must fully touch the welding plate and<br />
must not overlap the edge.<br />
RIGHT<br />
WRONG<br />
PrOCESSINg<br />
2<br />
13