trackspot ® Bolt User Manual - High End Systems

More documents

Recommendations

Info

CHAPTER 2 Installation and Setup Shutting Down the Fixture A DMX controller can shut down the fixture remotely with the Shutdown option in the Control Channel or you can simply disconnect from power. The trackspot Bolt fixture automatically shuts down in the event of DMX data loss longer than one minute. 14 trackspot ® Bolt User Manual
Chapter 3 The Menu System You can use the fixture’s onboard menu system to configure and test the trackspot Bolt fixture. The onboard trackspot Bolt menu system allows you to: • Assign a DMX start channel. • Access fixture options such as homing the fixture, viewing fixture status, and performing self tests. • View all DMX values on the link. • Identify fixture errors. Navigating the Menu System After homing, The LED screen will display HES, BOLT, the software version in the form V Major.minor (V1.1 for example), the DMX address in the C### format, and, if the defog fan is running, DEFG. You can access and navigate the menu system via the four menu navigation buttons on the fixture’s front panel. The LED display shows the menu items you select from the menu map. When accessing fixture options, the display will flash when a new option is selected (by pressing the or arrow buttons), and stops flashing when a new option is stored (by pressing the button). MENU button unlocks the menu and backs through menu levels UP and DOWN arrows scroll to a value or option ENTER button selects an option or a menu value To access the menu system: press and hold the button until AddR appears on the display. The menu system is protected against inadvertent menu changes by requiring the button to be held for a few seconds before allowing entry to the menu system. To return to the previous option or menu without changing the value: press the button. trackspot ® Bolt User Manual 15
Page 1 and 2: trackspot ® Bolt User Manual © Ba
Page 3 and 4: Product Modification Warning High E
Page 5 and 6: Warranty Information Limited Warran
Page 7 and 8: Table of Contents trackspot® Bolt
Page 9 and 10: Chapter 4: Fixture Programming DMX
Page 11 and 12: Chapter 1: Product Overview CHAPTER
Page 13 and 14: Specifications Mechanical Specifica
Page 15 and 16: Related Products and Accessories tr
Page 17 and 18: Chapter 2: Installation and Setup C
Page 19 and 20: Standing the Fixture on its End Han
Page 21 and 22: Linking trackspot Bolt Fixtures CHA
Page 23: Setting the DMX Start Channel CHAPT
Page 27 and 28: CHAPTER 3 The Menu System Level 1 L
Page 29 and 30: Set Menu (SET) Setting Factory Defa
Page 31 and 32: Defog Fan Mode (DEFG) CHAPTER 3 The
Page 33 and 34: Test Menu (TEST) CHAPTER 3 The Menu
Page 35 and 36: Information Menu (INFO) The Informa
Page 37 and 38: Viewing DMX Data for the Link (DATA
Page 39 and 40: Chapter 4: Fixture Programming The
Page 41 and 42: Static Color Wheel Static Color Fun
Page 43 and 44: Rotating Gobo Wheel Rotating Gobo W
Page 45 and 46: Dim CHAPTER 4 Fixture Programming I
Page 47 and 48: Appendix A: MSpeed Conversion Table
Page 49 and 50: Appendix B: Important Safety Inform
Page 51 and 52: ANHANG B: WICHTIGE HINWEISE FÜR IH
Page 53 and 54: Appendix B Important Safety Informa

trackspot ® Bolt User Manual - High End Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?