trackspot ® Bolt User Manual - High End Systems

CHAPTER 3
The Menu System
Inverting Tilt (T/IN)
This menu item inverts the direction of the tilt motor, to allow fixtures mounted opposite each
other vertically to respond to tilt movement commands in the same direction.
To invert the fixture’s tilt motion:
1. Press and hold until AddR appears on the LED display.
2. Scroll to the SET menu. Press to select.
3. Scroll to the T/IN menu. Press to select.
4. Scroll to ON to invert the fixture’s tilt motion, or OFF to return the fixture’s tilt motion to
normal orientation.
5. Press to store.
Swapping Pan and Tilt (SWAP)
This menu option swaps the pan motor and tilt motor operation to allow fixtures hung
perpendicular to each other to respond to pan and tilt movement commands in the same
direction.
To swap pan and tilt motion:
1. Press and hold until AddR appears on the LED display.
2. Scroll to the SET menu. Press to select.
3. Scroll to the SWAP menu. Press to select.
4. Scroll to ON to swap the fixture’s pan and tilt motion, or OFF to return the fixture’s pan and
tilt motion to normal orientation.
5. Press to store.
Data Loss (DLOS)
Use this menu item to determine how the fixture will react in the event of DMX data loss by
turning off the LED light engine upon Data Loss or keeping the LED light engine on until shut
down.
To select a data loss option:
1. Press and hold until AddR appears on the LED display.
2. Scroll to the SET menu. Press to select.
3. Scroll to the dLOS menu. Press to select.
4. Scroll to LONG to turn the LED light engine off only when the fixture is shut down, or SHRT
to turn off the LED light engine one second after data loss.
Press to store.
20 trackspot ® Bolt User Manual