universitarios junio - Universidad Autónoma de San Luis Potosí
universitarios junio - Universidad Autónoma de San Luis Potosí
universitarios junio - Universidad Autónoma de San Luis Potosí
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIÁMETRO<br />
NOMINAL<br />
Pulgada<br />
½<br />
¾<br />
1<br />
1 ¼<br />
1 ½<br />
2<br />
2 ½<br />
3<br />
4<br />
6<br />
14 Universitarios Potosinos<br />
Tubo HSS. Los tubos estructurales HSS están <strong>de</strong><br />
acuerdo con el estándar ASTM A-500 gra-<br />
do B, que les da las características que<br />
aparecen en la parte <strong>de</strong> especificaciones<br />
<strong>de</strong>l tubo HSS <strong>de</strong> esta sección. Estar conforme<br />
a dicho estándar origina su alta resistencia.<br />
Pue<strong>de</strong> ser llamado tubo estructural,<br />
perfil o tubo HSS que es el nombre<br />
en inglés (hollow structural sections).<br />
Características<br />
• Por su forma cerrada y bajo peso<br />
presentan un mejor comportamien-<br />
DIÁMETRO<br />
EXTERIOR<br />
Pulgada<br />
0.840<br />
1.050<br />
1.315<br />
1.660<br />
1.900<br />
2.375<br />
2.875<br />
3.500<br />
4.500<br />
6.565<br />
Wo (Dext)<br />
Fórmula aplicada: = -<br />
2<br />
W 1/2<br />
2<br />
o 1/2<br />
PESOS DE TUBO HUECO (REDONDO)<br />
DIÁMETRO<br />
INTERIOR<br />
Pulgada<br />
0.622<br />
0.824<br />
1.049<br />
1.380<br />
1.610<br />
2.067<br />
2.469<br />
3.068<br />
4.026<br />
6.065<br />
(Dint) 2<br />
2<br />
o 1/2<br />
ESPESOR<br />
Pulgada<br />
0.109<br />
0.113<br />
0.133<br />
0.140<br />
0.145<br />
0.154<br />
0.203<br />
0.216<br />
0.237<br />
0.250<br />
to a esfuerzos <strong>de</strong> torsión y resistencia<br />
al pan<strong>de</strong>o.<br />
• Facilidad <strong>de</strong> montaje, permite la<br />
realización <strong>de</strong> uniones simples por<br />
soldadura.<br />
• Superficies exteriores reducidas,<br />
sin ángulos vivos ni rebabas, que<br />
permiten un fácil mantenimiento y<br />
protección contra corrosión.<br />
• Posibilidad <strong>de</strong> configuraciones <strong>de</strong><br />
gran belleza.<br />
Conclusión<br />
Las fórmulas aplicadas dan valores muy<br />
aproximados en todos los casos, y prueban<br />
que son confiables.<br />
Lecturas recomendadas:<br />
McCormac, Jack C. Diseño <strong>de</strong> estructuras <strong>de</strong> acero,<br />
editorial Alfaomega, 2ª edición, 2002.<br />
Suarez Salazar, Carlos, Costo y tiempo en la edificación,<br />
México, D.F., Editorial Limusa, 3ª edición,<br />
1977.<br />
PESO CON<br />
FÓRMULA<br />
(kg/m)<br />
1.270<br />
1.687<br />
2.505<br />
3.391<br />
4.055<br />
5.451<br />
8.644<br />
11.304<br />
16.101<br />
25.159<br />
PESO<br />
REAL<br />
kg/m<br />
1.27<br />
1.69<br />
2.50<br />
3.39<br />
4.05<br />
5.44<br />
8.63<br />
11.29<br />
16.07<br />
25.36<br />
Don<strong>de</strong>:<br />
Dext = diámetro exterior en pulgadas.<br />
Dint = diámetro interior en pulgadas.<br />
o 1/2<br />
= diámetro <strong>de</strong> la varilla <strong>de</strong> ½ pulgada.