I[_i]ADVERTENCJA - Ppe-pressure-washer-parts.com
I[_i]ADVERTENCJA - Ppe-pressure-washer-parts.com
I[_i]ADVERTENCJA - Ppe-pressure-washer-parts.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KNOW YOUR PRESSURE WASHER<br />
_Read ....... Compare the the owner's illustrations manual withand your safety <strong>pressure</strong> rules <strong>washer</strong> before toperating familiarizeyour yourself <strong>pressure</strong> with the <strong>washer</strong>, locations of various<br />
controls and adjustments. Save this manual for future reference.<br />
Spray Gun<br />
Nozzle Extension with<br />
Quick Connect<br />
ProjectPro TM<br />
Nozzles<br />
High Pressure<br />
Hose<br />
Recoil Starter<br />
Fuel Tank<br />
Hose Reel<br />
Throttle Lever<br />
Oil Fill Cap/Dipstick<br />
Air<br />
Water inlet<br />
High Pressure<br />
Outlet<br />
Choke Lever<br />
\<br />
\<br />
Air Filter -- Protects engine by filtering dust and debris<br />
out of intake air.<br />
Automatic Cool Down System -- Cycles water through<br />
pump when water reaches 125°-155°F. Warm water will<br />
discharge from pump onto ground. This system prevents<br />
internal pump damage.<br />
Chemical Reservoirs = Used to provide detergent or<br />
other chemicals to the low <strong>pressure</strong> water stream.<br />
Choke Lever -- Prepares a cold engine for starting.<br />
Fuel Tank -- Fill tank with regular unleaded fuel. Always<br />
leave room for fuel expansion.<br />
High Pressure Hose -- Connect one end to the water<br />
pump and the other end to the spray gun.<br />
High Pressure Outlet --<br />
To connect high <strong>pressure</strong> hose.<br />
Hose Reel -- Used for storing hose while unit is not in<br />
use. Hose must be detached from pump and spray<br />
gun before storage.<br />
Pump equipped with<br />
Automatic Cool Down System<br />
Nozzle Extension with Quick Connect -- Allows you to<br />
switch between four different spray nozzles.<br />
Oil Fill Cap/Dipstick -- Check and fill engine with oil<br />
here. See page 18 for oil re<strong>com</strong>mendations and filling<br />
instructions.<br />
ProjectPro TM Nozzles -- Detergent, Max, General,<br />
and Delicate Nozzle: for various cleaning applications.<br />
Pump --<br />
Develops high <strong>pressure</strong>.<br />
Recoil Starter -- Use for starting the engine manually.<br />
Spray Gun -- Controls the application of water onto<br />
cleaning surface with trigger device. Includes safety<br />
latch.<br />
Throttle Lever--Sets engine in starting mode for<br />
recoil starter and stops a running engine.<br />
Water tnlet --<br />
Connect garden hose here.