DAZZLER RTR - Tamiya

2WD Buggy DAZZLERAdditional itemsNecessary accessoriesFuel for nitro powered model cars with different percentages of nitromethane.The lubrication of the engine depends on the percentage of oil, the flammability ofthe fuel increases with the percentage of nitro methane.There are different kinds of fuel available with a different percentage of nitro methane,depending on usage.You can buy the fuel for model cars in retailer shops for modelling.Attention! Avoid skin contact and avoid swallowing!Fuel bottleUse a special fuel bottle in orderto avoid spilling fuelLiter Nitromethane No. Application1,0 10% 13934 Breaking-in phase /Beginners1,0 16% 13935 Normal2,5 16% 139361,0 25% 13937 Race2,5 25% 13938After-run oil No. 905044After-run-oil protects the cylinder against corrosion. After driving operation put some drops of after-run oil into the carburettorand into the combustion chamber of the engine.Air filter oil No. 32648To prevent even fine dust from penetrating into the engine via the air intake wash the air filter and oil it afterwards with air filter oilbefore you start drivingGlow plugsGlow plugs are consumable parts. Choose a glow plug according to the type of engine, the type of fuel and thetemperature of the environment. Never use glow plugs for 4-stroke plane engines! A wrong glow plug lets theengine run incorrectly and complicates the tuning. In the worst case it destroys the engine.Glow plug Engine type Fuel type Temperature Item-Nr.Glow plug Rossi R2 hot 2 - 3,5 ccm w/o Nitro 0°C - +15°C 905006Glow plug Rossi R6 cold universal 10 - 13% Nitro +10°C - +25°C 905010Glow plug Rossi R7 cold universal 13 - 15% Nitro +15°C - +30°C 905011Glow plug Rossi R8 extra cold universal 15 - 30% Nitro +20°C - +40°C 905012Recommended tools:- Philips screw driver,big and small- Needle nose pliers- Modelling knife- Side cutter- Scissors- Hexagonal wrenches,different sizes- Screw driverfor the setting of thecarburettor24WWW.CARSON-MODELSPORT.COM