BETRIEBSANLEITUNG - Operator's Manual - John Deere
BETRIEBSANLEITUNG - Operator's Manual - John Deere
BETRIEBSANLEITUNG - Operator's Manual - John Deere
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SERVICE<br />
c CAUTION: Avoid injury! Components are installed under<br />
spring tension. Wear eye protection and use proper tools when<br />
installing and removing components with spring tension.<br />
C<br />
D<br />
H<br />
E<br />
B<br />
G<br />
F<br />
MX31159<br />
3. Remove control cables (C) from belt shield notch (D), and remove belt<br />
shield (B).<br />
E<br />
MX7491<br />
5. To remove drive belt, push down on front of drive sheave (F) to relieve<br />
spring tension on belt (E) and remove drive belt.<br />
NOTE: Tension spring (G) may come loose when drive belt is<br />
removed. Install after you replace belt.<br />
6. Move belt through deck opening (H) into underside of mower deck.<br />
7. Turn mower on its left side.<br />
c CAUTION: Avoid injury! Blades are sharp. Always wear<br />
gloves when handling blades or working near blades.<br />
4. Inspect belt (E) for excessive wear or damage.<br />
MX7491<br />
E<br />
I<br />
MX7492<br />
8. Remove drive belt (E) from blade sheave (I) and mower blade.<br />
9. Install new drive belt over mower blade and onto blade sheave.<br />
Service - 15