Kalzip® zipping machine
Kalzip® zipping machine
Kalzip® zipping machine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Deviating from the standard <strong>zipping</strong> <strong>machine</strong><br />
there is also a <strong>zipping</strong> <strong>machine</strong> with an angled<br />
drive for use in confined spaces.<br />
Zipping <strong>machine</strong> – version with angled drive<br />
7. Start-up and operation<br />
Before starting up the <strong>zipping</strong> <strong>machine</strong>, check<br />
that the safety bracket is tight and that there<br />
are no loose fixings!<br />
Start-up and operation may only be commenced<br />
if all prerequisites for compliance with the operating<br />
instructions have been fulfilled and the responsible<br />
personnel have read and understood<br />
the operating instructions.<br />
7.1 Electrical connection<br />
The mains voltage must correspond to the voltage shown<br />
on the rating plate. See 7.1 regarding connection and disconnection<br />
of the mains cable.<br />
Always switch the <strong>machine</strong> off before connecting<br />
or disconnecting the mains cable!<br />
Kalzip <strong>zipping</strong> <strong>machine</strong><br />
Connection and disconnection of the mains cable<br />
The switch (6, 1.3) serves as the on / off switch (press =<br />
ON, release = OFF). For continuous operation it can<br />
be latched with the lateral locking button (6, 1.2). The<br />
latching is released by pressing the switch again.<br />
Kalzip 31<br />
Deutsch<br />
Español Italiano Français English
Change language