IST236R01.4851 Rev00 OX4T:Layout 1 - Nice-service.com

ENunit by means of the built-in transmitter, or via cable to theOview programming unit. These devices facilitate programming,management of memorised codes, diagnostics andother operations.– Assigned personal ID number, known as “Certificate”, asstated on the sealed card supplied in the pack. The certificateenables access to many operations such as memorisationof new transmitters without the need for direct interventionon the receiver. Caution! – Keep the certificate in a safeplace to prevent use by unauthorised persons and “wireless”access to data stored in the receiver, unless the latterhas additional protection such as a programmed securitypassword.What is “NiceOpera”?Nice Opera is a system comprising variousdevices normally used in systems for the automationof gates, garage doors, and road barriers withmobile arms, de signed to communicate and ex -change data via radio, via “O-Code” encoding, andvia cable by me a ns of the protocol “BusT4”, withfull integration of the two systems.The devices in “NiceOpera” are:• transmitters in the NiceOne series;• receivers in the NiceOne series;• gearmotors with “BusT4” type control unit.There are also other supplementary software andhardware devices in addition to the above:• O-Box programming unit with dedicatedsoftware, for transmitters and receivers;• Oview programming unit, for control unitsand receivers. Oview can also be used inconjunction with:– a Bluetooth ® module and dedicated software,for data communication between Ovi -ew and a Per sonal computer (or palmtop);2