katalog eingebaute lager catalogue des roulements montes ...

ISN SN Series HFO Bearings and Sleeves SLEEVOILSLEEVOILDODGE/Reliance ElectricP.O. BOX 4996040 PONDERS COURTGREENVILLE, SC 29602-0499ATTENTION: SLEEVOIL BEARING APPLICATION ENGINEERINGFAX - (864) 281-2317 PHONE - (864) 281-2167 OR (864) 281-2253SLEEVOIL - Bearing Application Inquire FormPlease provide the information by mail, phone or faxCompany Name:Date:Address:Response Date:Contact Name: Phone: ( )Customer Reference: Fax: ( )Installation and Arrangement:Bearing Size in Inches: Shaft Speed ® Constant RPM® Variable MAX MIN® Turning GearType of Coolant:Plain (None) ® Water Cooled ® Air Cooled ® Plain - Circ. Oil ® Water Cooled - Circ. Oil® SAE 10 ® SAE 20 ® SAE 30 Other® ISO 32 ® SO 68 ® ISO 100Expected Temperature:Ambient MAX °F MIN °F Water Inlet MAX °F MIN °FAir Inlet MAX °F MIN °F Oil Inlet MAX °F MIN °FAir Velocity over Bearing Housing (FPM):Radial Load:Lbs. Thrust Load:Loading:Cooling Wheel:External Heat Source (Fan Temperature)FIXED(Non-Expansion)FREE(Expansion)® RTL ® RXT ® RTL ® RXT® STL ® P ® STL ® P® SSLLbs.Lbs.® Base ® Cap ® Base ® Cap® Yes ® No ® Yes° F® NoClosest Part of Bearing to Heat Source: Inches Inches(Includes Aux. Seals or Reverse Mount Seals)Indicate direction of resultant load. Showapproximate angle for each bearing.Remarks: State any unusual conditions such as shock loads, changes in thrust loads, low speedrequirements, hot shaft start-ups, environmental conditions (dust, chemicals, gases), etc.B10-14