12.07.2015 Views

D:\Documenti\Manuali\Elettrobar\La50 Elettrobar\2 ... - Diskbolaget

D:\Documenti\Manuali\Elettrobar\La50 Elettrobar\2 ... - Diskbolaget

D:\Documenti\Manuali\Elettrobar\La50 Elettrobar\2 ... - Diskbolaget

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

INSTRUCTION MANUAL FOR DISHWASHERSGBChap 6 SELF-DIAGNOSISThe machine is equipped with a self-diagnosis system that can detect and signal a series ofmalfunctions.AnomalyBOILER TANKDescription and possible remediesWater drainage anomaly.Water does not drain or drains abnormally. Check to see if the overflow has beenremoved. Check the drain tube is not bent or crushed, and that none of the filters areclogged. Run another drain cycle.BOILER TANKBoiler temperature reset anomaly.The boiler temperature reset has not occurred within the time limits set forth in thewash cycle. Turn the machine off and then back on and run another cycle.BOILER TANKWater filling anomaly.Check whether the plumbing connections are correct, and that the water supply cock isopen. Check the presence of the overflow.BOILER TANKTub thermometer anomaly. (Probe open)The machine does not measure the temperature in the tub. Turn the machine off andthen back on.BOILER TANKTub thermometer anomaly. (Probe shorted out)Interrupt the programme in progress, and shut off the dishwasher. Turn it back on aftera few minutes and start the cycle again.BOILER TANKBoiler thermometer anomaly. (Probe open)The machine does not measure the temperature in the boiler. Turn the machine off andthen back on.BOILER TANKBoiler thermometer anomaly. (Probe shorted out)Interrupt the programme in progress, and shut off the dishwasher. Turn it back on andstart the programme again.BOILER TANKBoiler temperature beyond limit.Interrupt the current programme, turn off the dishwasher and wait for a few minutes.Turn it back on after a few minutes and start the cycle again.BOILER TANKTub temperature beyond limit.Interrupt the current programme, turn off the dishwasher and wait for a few minutes.Turn it on and start the programme again.BOILER TANKElectromechanical safety.The value of the temperature (of the boiler and tub) or the level in the tub are beyondsafe values. The electromechanical safety has tripped. Contact an authorized servicecentre.Page 9 of 10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!