Junghans Multifrequenz Alarm Chronograph

44
The chronograph is started and
stopped again using the ‘SET+’
button. When the chronograph is
running, ‘ON’ is displayed in front of
the ‘CHRONO’ item on the menu.
Pressing the ‘RESET’ button resets
the counted time to ‘0:00:00.0’. The
reset function can only be used
once the chronograph has already
been stopped. When the chronograph
is running, the current split
time can be displayed by pressing
the ‘SET–/SPLIT’ button for about
5 seconds. The chronograph continues
running in the background.
5.2 Alarm
Press the ‘MODE’ button repeatedly
until you reach ‘ALARM’ mode.
You set the alarm time by using the
‘SET+’ and ‘SET–’ buttons. You can
adjust the time by the minute by
pressing either button briefly or
adjust it in fast forward or fast
rewind mode by holding the relevant
button down for longer.
45