Kenwood DVR-5070 - Home Electronics English (2001/7/1)

Speaker level setting
For this unit, the speaker levels have been set in advance so that the best volume balance is obtained with
standard use.
Reset as follows to match your listening environment.
DVR-5070 (EN)
47
1 Play a disc marked ”Dolby Digital”.
¡
SELECT
2 Stop the playback.
AUTO/MONO
3 Press TEST key for more than 2
seconds
SOUND
/NIGHT
The test tone is played back from the Left Front speaker.
Adjust the VOLUME CONTROL so that it is slightly loud
and fix it there.
“L” Blinks.
TEST
Operations
4 Press the TRIM (5/∞) keys to control
the speaker level.
The speakers will be switched as follows in intervals of
about 2 seconds.
L → C → R → RS → LS → SW
M U LTI
TRIM
C O N T.
÷ Press TEST (SOUND/NIGHT) key
to resume nomal mode.
Adjust the volume with the TRIM (5/∞) keys while the
indicator is flashing so that the volume from all speakers
except the subwoofer (SW) appears the same.
÷ The level of Front speakers, Center speaker and Surround
speakers adjustment are possible in the range from -6
dB to +6 dB.
The level of Subwoofer adjustment is possible in the
range from -9 dB to +9 dB.
Note
As the subwoofer (SW) has a special playback band, normal
adjustment is not possible with the test tone. Please
adjust the subwoofer while listening to actual music. (i)