Kenwood DVR-5070 - Home Electronics English (2001/7/1)
Kenwood DVR-5070 - Home Electronics English (2001/7/1)
Kenwood DVR-5070 - Home Electronics English (2001/7/1)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Control of a different device with the accessory remote controller<br />
Register the setup codes for your audio and video<br />
The devices which can be set up are VCR SAT (satellite tuner), TV, and CABLE TV).<br />
<strong>DVR</strong>-<strong>5070</strong> (EN)<br />
49<br />
1 Press one of the devises key for more<br />
than 2 seconds<br />
The LED on the remote<br />
control unit lights.<br />
DVD CD<br />
RADIO VCR SAT<br />
BAND<br />
FRONT TV CABLE<br />
2 Use the numeric keys to enter the<br />
setup code.<br />
Refer to the code table and enter the 4-digit setup code<br />
while the LED on the remote control unit is lit. (p)<br />
1 2 3<br />
4 5 6<br />
7 8 9<br />
CLEAR 0 P.MODE<br />
3Press DEVICE ( ) key, CH +/- keys<br />
or numeric keys to test the code.<br />
÷ The LED goes out when the code is not correct or not<br />
recognized.<br />
÷ When the setup code has been recognized, the LED<br />
flashes 3 times and setup is completed.<br />
Operations<br />
If the code is acceptable, your devices<br />
work as it is.<br />
Operating other devises<br />
1 Press one of devises key for<br />
operate.<br />
DVD CD RADIO VCR SAT<br />
BAND<br />
2 Press DEVICE . key to devise<br />
power on.<br />
DEVICE<br />
3 Press devise operate key.<br />
(Keys which can be used to<br />
operate connected devices<br />
E)<br />
FRONT TV CABLE
Change language