cadwork print
cadwork print
cadwork print
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>cadwork</strong> 3D Il maus<br />
1.2.1-1<br />
1.2.1 Il Maus con 3 tasti<br />
Il cursore si guida sullo schermo con i pulsanti manuali. Ci sono tre tasti :<br />
Il tasto (S) è quello di sinistra, il tasto (M) è quello di mezzo e il tasto (D) è quello di destra.<br />
Il significato dei tre tasti è indicato nella linea esplicativa in basso sullo schermo.<br />
All'inizio troviamo (S) per " ATTIVARE".<br />
(S) ATTIVARE (C) (D)<br />
Esempio : Menu<br />
"COPIA"<br />
TRANSLAZIONE<br />
ROTAZIONE<br />
SIMMETRIA<br />
TRANS-ROT.<br />
NM. DI COPIE<br />
(S) (C) (D)<br />
MAUS NEL MENU DI DESTRA TASTO DI SINISTRA (S) TASTO DI DESTRA (D)<br />
Nel menu di destra il<br />
cursore prende una forma<br />
rettangolare.<br />
MAUS NELLA FINESTRA GRAFICA<br />
=scegliere menu<br />
INDIETRO<br />
Apre il<br />
sottomenu<br />
Torna nel<br />
menu principale<br />
=indietro<br />
Nella finestra grafica, il cursore prende la forma d'una croce<br />
Significato dei tasti del maus :<br />
vd. capitolo 1.3 Attivare e capitolo<br />
1.4 Differenza fra punto e posizione<br />
Il tasto di destra esegue sempre<br />
l'ultimo comando del menu<br />
praticamente tornare indietro)<br />
TRANSLAZIONE<br />
ROTAZIONE<br />
SIMMETRIA<br />
TRANS-ROT.<br />
NM. DI COPIE<br />
INDIETRO<br />
Attenzione: premendo simultaneamente i tasti "Ctrl" e (L), il tasto centrale del mouse può essere sostituito da<br />
un mouse a due tasti.