7520-Revista V.7-n.3.indd - CLINICA DE ESTOMATOLOGIA ...

da Cunha TMA de Araújo RPC da Rocha PVB Amoedo RMP Cunha LPJ
de atuação em Implantodontia, sendo o afrouxamento de
parafusos a complicação mais frequente, referenciada por
67% dos pesquisados.
Quanto aos detalhes do planejamento, o pilar tipo Ucla
foi referido como o mais utilizado, 61,53% dos pesquisados
afi rmaram já ter combinado componentes com implantes
de diferentes marcas comerciais, 52,75% utilizam pilares
calcináveis com maior frequência e 85,7% utilizam mais frequentemente
ligas não nobre (níquel-cromo, cromo-cobalto,
Referências bibliográfi cas
1. Lourenço SV, Morano MJ, Daruge EJ. Complicações cirúrgicas e protéticas em
implantodontia. Rev Odonto Ciênc 2007;22(58):352-58.
2. Simon RL. Single implant-supported molar and premolar crowns: A ten year retrospective
clinical report. J Prosthet Dent 2003;90(6):517-21.
3. Romanos G, Toh CH, Siar CH, Swaminathan D, Ong AH, Donath K. Peri-implant bone
reactions to immediately loaded implants. J Periodontol 2001;2:506-11.
4. Hermann JS, Cochran DL, Buser D, Schenk RK, Schoolfi eld JD. Biologic width around
one and two piece titanium implants. A histometric evaluation of unloaded non-submerged
implants in the canine mandible. Clin Oral Implant Res 2001;12:559-71.
5. Piattelli A, Vrespa G, Petrone G, Lezzi G, Annibali S, Scarano A. Role of the microgap between
implant and abutment: A retrospective histologic evaluation in monkeys. J Periodontol
2003;74:346-52.
6. Coelho AL, Suzuki M, Dibart S, da Silva N, Coelho PG. Cross-sectional analysis of the
implant-abutment interface. J Oral Rehab 2006;34(7):508-16.
7. Byrne D, Houston F, Cleary R, Claffey N. The fi t of cast and premachined implant abutments.
J Prosthet Dent 1998;80(2):184-92.
8. Costa EMV, Hoçoya LS, Bottino MA. The fi tness of copings constructed over UCLA abutments
and the implant, constructed by different techniques: Casting and casting with laser welding.
J Appl Oral Sci 2004;12(4):349-54.
9. Callan DP, Cobb CM, Williams KB. DNA probe identifi cation of bacteria colonizing
internal surfaces of the implant-abutment interface: A preliminary study. J Periodontol
2005;76(1):115-20.
10. Jansen VK, Conrade G, Richter EJ. Microbial leakage and marginal fi t of the implant-abutment
interface. Int J Oral Maxillofac Implants 1997;12(4):527-40.
11. Carvalho Mca, Bondioli IR, Costa EMV, Nishioca RS, Botino MA, Neisser MP. avaliação
microscópica entre os pilares Gold UCLA à plataforma do implante e UCLA de tefl on fundidos
em titânio e liga de níquel-cromo-titânio. Estudo in vitro. Revista Brasileira de Cirurgia e
Implantodontia 2002;9(34):105-10.
12. Quirynen M, Steenberghe D. Bacterial colonization of the internal part of two-stage implants:
an in vivo study. Clin Oral Implant Res 1993;4(3):158-61.
13. Quirynen M, Bollen CM, Eyssen H. Microbial penetration along the implant components
of Bränemark system. Clin Oral Implant Res 1994;5(4):239-44.
14. Goll GE. Production of accurately fi tting full arch implant frameworks: part I- clinical
procedures. J Prosthet Dent 1991;66(3):377-84.
15. Sorensen JA, Avera SP, Tomas C. Comparison of interface fi delity of implant systems. J Dent
368
REVISTA IMPLANTNEWS 2010;7(3):363-8
titânio) em detrimento de ligas com alto teor de ouro (14,3%)
na fundição de seus trabalhos.
Recebido em: mar/2009
Aprovado em: fev/2010
Endereço para correspondência:
Tiago de Morais Alves da Cunha
Av. Antônio Carlos Magalhães, 3.359 - Apto. 1.104 - Ed. Torres do Iguatemi - Iguatemi
41800-700- Salvador - BA
Tel.: (71) 3351-9112
tiagoalvescunha@hotmail.com
Res 1991;70(3):540.
16. Simamoto Jr PC, Barbosa GAS, Soares CJ, Fernando Neto AJ, Neves FD. Desajuste vertical
antes e após o emprego de retifi cadores para pilares de prótese implantada tipo UCLA
fundíveis. Cienc odontol Bras 2005;8(1):39-46.
17. Vigolo P, Majzoub Z, Cordioli G. Measurement of the dimensions and abutment rotational
freedom of gold-machined 3i UCLA- type abutments in the as-received condition, after
casting with a noble metal alloy and porcelain fi ring. J Prosthet Dent 2000;84(5):548-53.
18. Alkan I, Sertgöz A, Ekici B. Infl uence of occlusal forces on stress distribution in preloaded
dental implant screws. J Prosthet Dent 2004;91(4):319-25.
19. Kano SC, Binon P, Bonfante G, Curtis DA. Effect of casting procedures on screw loosening
in UCLA-Type abutments. J Prosthodontics 2006;15(2):77-81.
20. Sartori IAM, Francischone CE. Análise comparativa da interface intermediário/cilindro
protético. Rev Bras Odontol 2000;57(6):367-71.
21. Jemt T, Lindén L, Lekholm U. Failures and complications in 127 consecutively placed fi xed
partial prosthesis supported by Bränemark implants: From prosthetic treatment to fi rst annual
checkup. Int J Oral Maxillofac Implants 1992;7:40-4.
22. Bianco G, di Raimondo R, Luongo G, Paoleschi C, Piccoli C, Rangert B. Osseointegrated
implant for single tooth replacement: A retrospective multicenter study on routine use in
private practice. Clin Implant Dent Relat Res 2000;2:152-58.
23. Palmer RM, Palmer PJ, Smith BJ. A 5-year prospective study of Astra single tooth implants.
Clin Oral Implant Res 2000;11:179-82.
24. Martin WC, Woody RD, Miller BH, Miller AN. Implant abutment screw rotations and preload
for four different screw materials and surfaces. J Prosthet Dent 2001;86(1):24-32.
25. Cavazos E, Bell FA. Preventing loosening of implant abutment screws. J Prosthet Dent
1996;76:566-69.
26. Binon PP. Evaluation of the effectiveness of a technique to prevent screw loosening. J Prosthet
Dent 1998;79(4):430-32.
27. Yousef H, Luke A, Ricci J, Weiner S. Analysis of changes in implant screws subject to occlusal
loading: A preliminary analysis. Implant Dent 2005;14(4):378-82.
28. McGlumphy EA, Mendel DA, Holloway JA. Implant screws mechanics. Dent Clin N Amer
1998;42(1):71-89.
29. Piermatti J. An in vitro analysis of implant screw torque loss with external hex and internal
connection implant systems. Implant Dent 2006;15(4):427-32.
30. Khraisat A, Hashimoto A, Nomura S, Miyakawa O. Effect of lateral cyclic loading on abutment
screw loosening of an external hexagon implant system. J Prosthet Dent 2004;91(4):326-34.