INSTRUCTION MANUAL - Virtasenkauppa.fi
INSTRUCTION MANUAL - Virtasenkauppa.fi
INSTRUCTION MANUAL - Virtasenkauppa.fi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety decals<br />
The following warning signs can be located in the backhoe. In each decal contains important safety<br />
information which is necessary to ensure safe operation of the machine. All safety decal locations on the<br />
backhoe are listed below. Use this information if you need to replace a damaged decal.<br />
Maintaining the safety decals<br />
1. Keep decals clean and in readable condition.<br />
2. Wash the warning signs with soap and water, dry with soft cloth.<br />
3. Replace damaged or missing decals supplied by your dealer.<br />
4. When components are replaced on the machine during repair, all safety signs on the components<br />
must be replaced with new signs.<br />
5. Place the new decal in a clean, dry surface and push the air bubbles out to the edges of the decal.<br />
Decal location<br />
IMPORTANT<br />
Safety decals are visible when mounting the backhoe. ”Right” and ”left” used in the manual are viewed<br />
from the direction of travel.<br />
Location: Main frame<br />
Location: Each side of the main frame<br />
Location: In each stabilizer cylinder<br />
Location: Each side of main frame<br />
Location: Boom frame, next to locking latch