11.07.2015 Views

xtp110 lumilinko snöslunga snow thrower - Virtasenkauppa.fi

xtp110 lumilinko snöslunga snow thrower - Virtasenkauppa.fi

xtp110 lumilinko snöslunga snow thrower - Virtasenkauppa.fi

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure 15life.CAUTION: DO NOT use non-detergent oil or 2-stroke engine oil. It could shorten the engine’s serviceSpark PlugWARNING! DO NOT check for spark with spark plug removed. DO NOT crank engine with spark plugremoved.WARNING! If the engine has been running, the muffler will be very hot .Be careful not to touch themuffler.To ensure proper engine operation, the spark plug must be properly gapped and free of deposits.1. Remove the spark plug boot and use a spark plug wrench to remove the plug. See <strong>fi</strong>gure 16.Figure 162. Visually inspect the spark plug. Discard the spark plug if there is apparent wear, or if the insulator iscracked or chipped. Clean the spark plug with a wire brush if it is to be reused.3. Measure the plug gap with a feeler gauge. Correct as necessary by bending side electrode. The gapshould be set to .02-.03 inches (0.60-0.80mm). See <strong>fi</strong>gure 16.Kuva 174. Check that the spark plug washer is in good condition and thread the spark plug in by hand to preventcross threading.65

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!